Cisco Linksys SFE1000P Reference Manual Download

Page: 171 / 237

163

Chapter 13: Configuring Quality of Service
Defining General Settings

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

–

CIR

— Defines Committed Information Rate

(

CIR) as the queue shaping type. The

possible field values are:

For FE ports, the rate is 64 - 100,000 Kbps.
For GE ports, the rate is 64 - 1,000,000 Kbps.

–

CbS

— Defines Committed Burst Size (CbS) as the queue shaping type. CbS is

supported only on GE interfaces. The possible field value is 4096 - 16,769,020 bytes.

Modifying Bandwidth Settings

The

Edit Bandwidth Page

allows network managers to edit the bandwidth settings for specified

egress and ingress interfaces.

Edit Bandwidth Page

The Edit Bandwidth Page contains the following fields:

•

Interface

— Indicates whether the interface, for which bandwidth settings are edited, is a

port or a LAG..

•

Enable Egress Shaping Rate Status

— Indicates if shaping is enabled on the interface. The

possible field values are:

–

Checked

— Enables egress shaping on the interface.

–

Unchecked

— Disables egress shaping on the interface.

•

Committed Information Rate (CIR)

— Defines CIR as the queue shaping type. The possible

field values are:

–

For FE ports, the rate is 64 - 100,000 Kbps.

–

For GE ports, the rate is 64 - 1,000,000 Kbps.

•

Committed Burst Size (CbS)

— Defines CbS as the queue shaping type. CbS is supported

only on GE interfaces. The possible field value is 4096 - 16,769,020 bytes.

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands