manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

83

Chapter 7: Configuring VLANs

 

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

7

Configuring VLANs

VLANs are logical subgroups with a Local Area Network (LAN) which combine user stations and 
network devices into a single unit, regardless of the physical LAN segment to which they are 
attached. VLANs allow network traffic to flow more efficiently within subgroups. VLANs use 
software to reduce the amount of time it takes for network changes, additions, and moves to be 
implemented.

VLANs have no minimum number of ports, and can be created per unit, per device, or through any 
other logical connection combination, since they are software-based and not defined by physical 
attributes.

VLANs function at Layer 2. Since VLANs isolate traffic within the VLAN, a Layer 3 router working at 
a protocol level is required to allow traffic flow between VLANs. Layer 3 routers identify segments 
and coordinate with VLANs. VLANs are Broadcast and Multicast domains. Broadcast and Multicast 
traffic is transmitted only in the VLAN in which the traffic is generated.

VLAN tagging provides a method of transferring VLAN information between VLAN groups. VLAN 
tagging attaches a 4-byte tag to packet headers. The VLAN tag indicates to which VLAN the packets 
belong. VLAN tags are attached to the VLAN by either the end station or the network device. VLAN 
tags also contain VLAN network priority information.

Combining VLANs and GARP (Generic Attribute Registration Protocol) allows network managers to 
define network nodes into Broadcast domains. The VLAN Management section contains the 
following pages:

• Defining VLAN Properties

• Defining VLAN Membership

• Defining Interface Settings

• Configuring GVRP Settings

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

F5 i5000 Series Platform Manual preview
i5000 Series
Brand: F5 Pages: 72
Ubiquiti U5-24-500W Quick Start Manual preview
U5-24-500W
Brand: Ubiquiti Pages: 23
QNO 2WAN 3LAN User Manual preview
2WAN 3LAN
Brand: QNO Pages: 106
Face XR18 User Manual preview
XR18
Brand: Face Pages: 8
Funkwerk TR 200 aw/ bw Operating Instructions preview
TR 200 aw/ bw
Brand: Funkwerk Pages: 2
Conel UR5i v2 SL User Manual preview
UR5i v2 SL
Brand: Conel Pages: 32
Alfa Network AC1200R Setup Manual preview
AC1200R
Brand: Alfa Network Pages: 11
ADTRAN 1200864L1 Quick Start Manual preview
1200864L1
Brand: ADTRAN Pages: 2
IMC Networks Wireless Outdoor Bridge XI-1500-IH Quick Installation Manual preview
Wireless Outdoor Bridge XI-1500-IH
Brand: IMC Networks Pages: 13
CSI 7798 I/SITE LAN Installation Manual preview
7798 I/SITE LAN
Brand: CSI Pages: 56
ZyXEL Communications Dimension GS-2024 User Manual preview
Dimension GS-2024
Brand: ZyXEL Communications Pages: 266
QRS Q-Sync Connection Manual preview
Q-Sync
Brand: QRS Pages: 11
Vivotek ND9312 User Manual preview
ND9312
Brand: Vivotek Pages: 185
ELC dmXLAN node6x User Manual preview
dmXLAN node6x
Brand: ELC Pages: 12
MikroTik LHG 60G Quick Manual preview
LHG 60G
Brand: MikroTik Pages: 25
Billion BIPAC-5100 User Manual preview
BIPAC-5100
Brand: Billion Pages: 53
Gestetner 2000 Operating Instructions Manual preview
2000
Brand: Gestetner Pages: 24
ADC PG-FLEXPLUS PLL-735 Manual preview
PG-FLEXPLUS PLL-735
Brand: ADC Pages: 78

Brands by name

Popular brands

Load more brands