manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

61

Chapter 5: Configuring Device Security
Defining Access Control

 

SFE1000P Gigabit Ethernet Switch Reference Guide

Chapter

5

•

Delete Rule

 — To remove an ACE rule, click the rule’s checkbox and click the 

Delete Rule

 

button.

Add IP Based ACL

Add IP Based ACL Page

The 

Add IP Based ACL Page

 contains the following fields:

•

ACL Name 

— Displays the user-defined IP based ACLs.

•

New Rule Priority 

— Indicates the rule priority, which determines which rule is matched to a 

packet on a first-match basis. 

•

Protocol 

— Creates an ACE based on a specific protocol. For a list of available protocols, 

see the 

Protocol

 field description in the 

IP Based ACL Page

 above.

•

Source Port

 — Defines the TCP/UDP source port to which the ACE is matched. This field is 

active only if 

800/6-TCP

 or 

800/17-UDP

 are selected in the 

Select from List

 drop-down 

menu. The possible field range is 0 - 65535.

•

Destination Port 

— Defines the TCP/UDP destination port. This field is active only if 

800/6-

TCP

 or 

800/17-UDP

 are selected in the 

Select from List

 drop-down menu. The possible field 

range is 0 - 65535.

•

TCP Flags

 — Filters packets by TCP flag. Filtered packets are either forwarded or dropped. 

Filtering packets by TCP flags increases packet control, which increases network security.

•

ICMP 

— Indicates if ICMP packets are permitted on the network.

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

PACOM Professional Series Quick Manual preview
Professional Series
Brand: PACOM Pages: 15
SAF Phoenix G2 IDU Quick Start Manual preview
Phoenix G2 IDU
Brand: SAF Pages: 30
Queclink GV600 Series Instruction Manual preview
GV600 Series
Brand: Queclink Pages: 9
Juniper MX2010 Hardware Manual preview
MX2010
Brand: Juniper Pages: 825
Rosewill RC-402 User Manual preview
RC-402
Brand: Rosewill Pages: 3
Moxa Technologies PT-7710 Series Hardware Installation Manual preview
PT-7710 Series
Brand: Moxa Technologies Pages: 2
TP-Link Archer VR500vd Installation Manual preview
Archer VR500vd
Brand: TP-Link Pages: 7
KYLAND Technology KIEN1009 Hardware Installation Manual preview
KIEN1009
Brand: KYLAND Technology Pages: 24
Alcatel-Lucent 1353 Brochure preview
1353
Brand: Alcatel-Lucent Pages: 12
H3C AR 46-80 Installation Manual preview
AR 46-80
Brand: H3C Pages: 103
LevelOne ServCon FPS-3003 Quick Install Manual preview
ServCon FPS-3003
Brand: LevelOne Pages: 45
Allied Telesis AR440S Hardware Reference Manual preview
AR440S
Brand: Allied Telesis Pages: 44
Allied Telesis AT-WR4500 Series User Manual preview
AT-WR4500 Series
Brand: Allied Telesis Pages: 264
Netstor NA762TB3 User Manual preview
NA762TB3
Brand: Netstor Pages: 17
COMBA TB-1800 Equipment Manual preview
TB-1800
Brand: COMBA Pages: 57
Adeunis RF COMFORT LwM2M User Manual preview
COMFORT LwM2M
Brand: Adeunis RF Pages: 68
Crestron C2N-NPA8 Operation Manual preview
C2N-NPA8
Brand: Crestron Pages: 40
D-Link Xtreme N DUO Brochure & Specs preview
Xtreme N DUO
Brand: D-Link Pages: 2

Brands by name

Popular brands

Load more brands