Cisco Linksys SFE1000P Reference Manual Download

Page: 59 / 237

Chapter 5: Configuring Device Security
Defining 802.1x

SFE1000P Gigabit Ethernet Switch Reference Guide

Chapter

–

Disable

— Indicates that traps are disabled for Multiple hosts.

•

Trap Frequency

— Defines the time period by which traps are sent to the host. The Trap

Frequency (1-1000000) field can be defined only if multiple hosts are disabled. The default
is 10 seconds.

•

Status

— Indicates the host status. If there is an asterisk (*), the port is either not linked or is

down. The possible field values are:

–

Unauthorized

— Indicates that either the port control is Force Unauthorized and the port

link is down, or the port control is Auto but a client has not been authenticated via the
port.

–

Not in Auto Mode

— Indicates that the port control is Forced Authorized, and clients

have full port access.

–

Single-host Lock

— Indicates that the port control is Auto and a single client has been

authenticated via the port.

–

No Single Host

— Indicates that Multiple Host is enabled.

•

Number of Violations

— Indicates the number of packets that arrived on the interface in

single-host mode, from a host whose MAC address is not the supplicant MAC address.

Modifying Multiple Host Settings

Edit Multiple Host Page

The

Edit Multiple Host Page

contains the following fields:

•

Port

— Displays the port number for which advanced port-based authentication is enabled.

•

Enable Multiple Hosts

— Indicates whether multiple hosts are enabled. Multiple hosts must

be enabled in order to either disable the ingress-filter, or to use port-lock security on the
selected port. The possible field values are:

–

Checked

— Multiple host mode is enabled.

–

Unchecked

— Single host mode is enabled. This is the default value.

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands