manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

102

Chapter 8: Configuring IP Information
Configuring Layer 2 IP Addresses

 

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

8

–

All

 — All ARP entries are cleared.

–

Dynamic

 — Only dynamic ARP entries are cleared.

–

Static

 — Only static ARP entries are cleared.

ARP Entries

•

Interface 

— Indicates the interface connected to the device.

•

IP Address — 

Indicates the 

station IP address, which is associated with the MAC address 

filled in below.

•

MAC Address — 

Indicates the 

station MAC address, which is associated in the ARP table 

with the IP address. 

•

Status 

— Indicates the ARP Table entry status. Possible field values are: 

–

Dynamic

 — Indicates the ARP entry was learned dynamically.

–

Static

 — Indicates the ARP entry is a static entry.

Add ARP

The 

Add ARP Page

 allows you to enter ARP addresses.

Add ARP Page

The 

Add ARP Page

 contains the following fields:

•

VLAN 

— Indicates the ARP-enabled interface.

•

IP Address — 

Indicates the 

station IP address, which is associated with the MAC address 

filled in below.

•

MAC Address — 

Indicates the 

station MAC address, which is associated in the ARP table 

with the IP address. 

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

3Com IntelliJack NJ200 Datasheet preview
IntelliJack NJ200
Brand: 3Com Pages: 4
ICP DAS USA ET-7000 series Quick Start Manual preview
ET-7000 series
Brand: ICP DAS USA Pages: 14
ICP DAS USA I-2533 User Manual preview
I-2533
Brand: ICP DAS USA Pages: 25
ICP DAS USA ET-2200 Series Manual preview
ET-2200 Series
Brand: ICP DAS USA Pages: 15
ICP ZT-2550 Quick Start Manual preview
ZT-2550
Brand: ICP Pages: 14
Ubiquiti U5-24-500W Quick Start Manual preview
U5-24-500W
Brand: Ubiquiti Pages: 23
Lanner NCA-2510 Installation Manual preview
NCA-2510
Brand: Lanner Pages: 2
LORD AP5103 Series Technical Manual preview
AP5103 Series
Brand: LORD Pages: 9
Matrix Switch Corporation MSC-5-3232 Product Manual preview
MSC-5-3232
Brand: Matrix Switch Corporation Pages: 61
Kohler Mira Pixel User Manual preview
Mira Pixel
Brand: Kohler Pages: 32
Lutron Electronics Smart Bridge Quick Start Manual preview
Smart Bridge
Brand: Lutron Electronics Pages: 4
WolfPack 18x18 Card Cage User Manual preview
18x18 Card Cage
Brand: WolfPack Pages: 31
IMC Networks iMcV-FiberLinX Operation Manual preview
iMcV-FiberLinX
Brand: IMC Networks Pages: 36
GarrettCom Industrial Network Track OSI Brochure preview
Industrial Network Track OSI
Brand: GarrettCom Pages: 10
Patton electronics IPLink 2803 Specifications preview
IPLink 2803
Brand: Patton electronics Pages: 2
Microtek MiniLink Operation Manual preview
MiniLink
Brand: Microtek Pages: 25
TRENDnet TW100-W2plus Specifications preview
TW100-W2plus
Brand: TRENDnet Pages: 2
TRENDnet TE100-S2424V Specifications preview
TE100-S2424V
Brand: TRENDnet Pages: 2

Brands by name

Popular brands

Load more brands