manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

79

Chapter 6: Configuring Device Interfaces
Defining LAG Settings

 

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

6

•

Flow Control

 — The current Flow Control setting. Flow control may be enabled, disabled, or 

be in auto negotiation mode. Flow control operates when the ports are in full duplex mode.

•

PVE 

— Indicates that this LAG’s ports are protected by an uplink, so that the forwarding 

decisions are overwritten by those of the ports that protect them.

LAG Configuration Settings

LAG Configuration Settings

The 

LAG Configuration Settings

 contains the following fields:

•

LAG 

— Displays the LAG ID number.

•

Description 

— Displays the user-defined port name.

•

LAG Type

 — The port types that comprise the LAG. 

•

Admin Status

 — Enables or disables traffic forwarding through the selected LAG.

•

Current LAG Status

 — Indicates if the LAG is currently operating.

•

Reactivate Suspended LAG

 — Reactivates a port if the LAG has been disabled through the 

locked port security option.

•

Operational Status

 — Defines whether the LAG is currently operational or non-operational. 

•

Admin Auto Negotiation

 — Enables or disables Auto Negotiation on the LAG. Auto-

negotiation is a protocol between two link partners that enables a LAG to advertise its 

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

US Robotics USR8700 User Manual preview
USR8700
Brand: US Robotics Pages: 156
Eaton APS6-400 Series Installation And Operation Manual preview
APS6-400 Series
Brand: Eaton Pages: 114
Patton electronics 3087 Quick Start Manual preview
3087
Brand: Patton electronics Pages: 12
HGST Ultrastar Serv24 S2122-N24-4 Installation Manual preview
Ultrastar Serv24 S2122-N24-4
Brand: HGST Pages: 36
SmartBridges airHaul Nexus sB3010 User Manual preview
airHaul Nexus sB3010
Brand: SmartBridges Pages: 80
hilscher netHOST NHST-T100 User Manua preview
netHOST NHST-T100
Brand: hilscher Pages: 75
TP-Link JetStream T2600G-28TS User Manual preview
JetStream T2600G-28TS
Brand: TP-Link Pages: 1136
ADTRAN Total Access 1500 Dual FXS/DPO Quick Start Manual preview
Total Access 1500 Dual FXS/DPO
Brand: ADTRAN Pages: 2
Tenda FH456 User Manual preview
FH456
Brand: Tenda Pages: 82
Mobatime DTS 4020.timebridge Mounting And Instruction Manual preview
DTS 4020.timebridge
Brand: Mobatime Pages: 94
QSC Q-SYS QIO-GP8x8 Hardware User Manual preview
Q-SYS QIO-GP8x8
Brand: QSC Pages: 13
Ultra Fan Commander User Manual preview
Fan Commander
Brand: Ultra Pages: 4
TRENDnet TS-U100 - NAS Server - USB User Manual preview
TS-U100 - NAS Server - USB
Brand: TRENDnet Pages: 47
ICP DAS USA ZT-2005-C8 User Manual preview
ZT-2005-C8
Brand: ICP DAS USA Pages: 60
KTI Networks KGS-2421 User Manual preview
KGS-2421
Brand: KTI Networks Pages: 147
3Com 3C410012A - OfficeConnect Remote 531 Access Router Getting Started Manual preview
3C410012A - OfficeConnect Remote 531 Access Router
Brand: 3Com Pages: 72
D-Link DIR-803 User Manual preview
DIR-803
Brand: D-Link Pages: 159
D-Link DIR-810L User Manual preview
DIR-810L
Brand: D-Link Pages: 169

Brands by name

Popular brands

Load more brands