Cisco Linksys SFE1000P Reference Manual Download

Page: 189 / 237

181

Chapter 14: Managing System Files
File Management Overview

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

•

TFTP Server

— Specifies the TFTP Server IP Address for downloading or uploading the file.

•

Source File

— Name of the configuration file.

•

Destination File

— Specifies the type of configuration file to be created. The possible values

are:

–

Running

— Contains the configuration currently valid on the device.

–

Starting

— Contains the configuration which will be valid following system startup or

reboot.

–

Backup configurations

— Contains a copy of the system configuration for restoration

following a shutdown or a fault.

Copy Files

In the

Copy Files Page

, network administrators can copy configuration files from one device to

another.

Copy Files Page

The

Copy Files Page

contains the following fields:

•

Restore Configuration Factory Defaults

— Resets the Configuration file to the factory

defaults. The factory defaults are reset after the device is reset. When not selected, the
device maintains the current Configuration file.

•

Copy Configuration

— Indicates the device configuration file to copy and the intended

usage of the copied file (Running, Starting, or Backup).

–

Source File Name

— Indicates the type of configuration file to copy from the device.

–

Destination File Name

— Defines the intended usage of the copied configuration file on

the destination device.

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands