manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

65

Chapter 5: Configuring Device Security
Defining Access Control

 

SFE1000P Gigabit Ethernet Switch Reference Guide

Chapter

5

Defining ACL

 

Binding

When an ACL is bound to an interface, all the ACE rules that have been defined are applied to the 
selected interface. Whenever an ACL is assigned on a port or a LAG flows from that ingress interface 
that do not match the ACL are matched to the default rule, which is Drop unmatched packets. 

ACL Binding Page

The 

ACL Binding Page 

contains the following fields: 

•

Copy From Entry Number

 — Copies the ACL information from the defined interface.

•

To Entry Number(s)

 — Assigns the copied ACL information to the defined interface.

•

Ports/LAGs

 — Indicates the interface to which the ACL is bound. 

For each entry, an interface has a bound ACL.

•

Interface

 — Indicates the interface to which the associated ACL is bound. 

•

ACL Name

 — Indicates the ACL which is bound to the associated interface. 

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

Eaton Network Card-MS User Manual preview
Network Card-MS
Brand: Eaton Pages: 89
LaCie d2 Network 2 Quick Install Manual preview
d2 Network 2
Brand: LaCie Pages: 44
LaCie LaCie Ethernet Disk Datasheet preview
LaCie Ethernet Disk
Brand: LaCie Pages: 2
LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Brand: LaCie Pages: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Brand: LaCie Pages: 14
LaCie 12big Rack Fibre 8 Quick Install Manual preview
12big Rack Fibre 8
Brand: LaCie Pages: 9
Aztech DSL1000EW(L) Speci?Cations preview
DSL1000EW(L)
Brand: Aztech Pages: 2
CELOT CTR-180 User Manual preview
CTR-180
Brand: CELOT Pages: 34
Cisco MERAKI MX450 Installation Manual preview
MX450
Brand: Cisco MERAKI Pages: 4
X-Micro IEEE 802.11b User Manual preview
IEEE 802.11b
Brand: X-Micro Pages: 49
Airlink101 AR325W Quick Installation Manual preview
AR325W
Brand: Airlink101 Pages: 13
ICP DAS USA iWSN-200E Quick Start Manual preview
iWSN-200E
Brand: ICP DAS USA Pages: 8
MA lighting 8Port Node Quick Manual preview
8Port Node
Brand: MA lighting Pages: 49
ZyXEL Communications Comet 3356P-LAN User Manual preview
Comet 3356P-LAN
Brand: ZyXEL Communications Pages: 38
Idis DR-8364F Quick Manual preview
DR-8364F
Brand: Idis Pages: 16
Altimium CVHH2 User Manual preview
CVHH2
Brand: Altimium Pages: 12
Enterasys Security Router X-PeditionTM User Manual preview
Security Router X-PeditionTM
Brand: Enterasys Pages: 466
H3C AR 46-80 Installation Manual preview
AR 46-80
Brand: H3C Pages: 103

Brands by name

Popular brands

Load more brands