Cisco Linksys SFE1000P Reference Manual Download

Page: 37 / 237

Chapter 5: Configuring Device Security
Defining RADIUS

SFE1000P Gigabit Ethernet Switch Reference Guide

Chapter

Modifying RADIUS Server Settings

Edit RADIUS Settings Page

The

Edit RADIUS Settings Page

contains the following fields:

•

IP Address

— Displays the

RADIUS

Server IP address.

•

Priority

— The server priority. The possible values are 0-65535, where 1 is the highest

value. The RADIUS Server priority is used to configure the server query order.

•

Authentication Port

— Identifies the authentication port. The authentication port is used to

verify the RADIUS server authentication. The authenticated port default is 1812.

•

Number of Retries

— Defines the number of transmitted requests sent to RADIUS server

before a failure occurs. The possible field values are 1 - 10. Three is the default value.

•

Timeout for Reply

— Defines the amount of the time in seconds the device waits for an

answer from the RADIUS server before retrying the query, or switching to the next server.
The possible field values are 1 - 30. Three is the default value.

•

Dead Time

— Defines the amount of time (minutes) that a RADIUS server is bypassed for

service requests. The range is 0-2000. The Dead Time default is 0 minutes.

•

Key String

— Defines the default key string used for authenticating and encrypting all

RADIUS communications between the device and the RADIUS server. This key must match
the RADIUS encryption.

•

Source IP Address

— Defines the source IP address that is used for communication with

RADIUS servers.

•

Usage Type

— Specifies the RADIUS server authentication type. The default value is Login.

The possible field values are:

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands