Cisco Linksys SFE1000P Reference Manual Download

Page: 170 / 237

162

Chapter 13: Configuring Quality of Service
Defining General Settings

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

Configuring Bandwidth

The

Bandwidth Page

allows network managers to define the bandwidth settings for specified egress

and ingress interfaces.

Rate Limits and Shaping are defined per interface:

• Rate Limit sets the maximum bandwidth allowed on ingress interfaces.

• Shaping Rate sets the maximum bandwidth allowed on egress interfaces. On GE ports,

traffic shape for burst traffic (CbS) can also be defined.

Bandwidth Page

The

Bandwidth Page

contains the following fields:

•

Ports/LAG

— Specifies whether the bandwidth settings are displayed for ports or for LAGs.

•

Interface

— Indicates the interface for which this bandwidth information is displayed.

•

Ingress Rate Limit

— Indicates the traffic limit for ingress interfaces. The possible field values

are:

–

Status

— Enables or disables rate limiting for ingress interfaces.

Disable

is the default

value.

–

Rate Limit

— Defines the rate limit for ingress ports. Defines the amount of bandwidth

assigned to the interface.

For FE ports, the rate is 62 - 100,000 Kbps.
For GE ports, the rate is 62 - 1,000,000 Kbps.

•

Egress Shaping Rates

— Indicates the traffic shaping type, if enabled, for egress ports. The

possible field values are:

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands