Cisco Linksys SFE1000P Reference Manual Download

Page: 147 / 237

139

Chapter 12: Configuring SNMP
Defining SNMP Users

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

Add SNMP Group Membership

The

Add SNMP Group Membership Page

provides information for assigning SNMP access control

privileges to SNMP groups.

Add SNMP Group Membership Page

The

Add SNMP Group Membership Page

contains the following fields.

•

User Name

— Provides a user-defined local user list.

•

Engine ID

— Indicates either the local or remote SNMP entity to which the user is connected.

Changing or removing the local SNMP Engine ID deletes the SNMPv3 User Database.

–

Local

— Indicates that the user is connected to a local SNMP entity.

–

Remote

— Indicates that the user is connected to a remote SNMP entity. If the Engine ID

is defined, remote devices receive inform messages.

•

Group Name

— SNMP group, which can be chosen from the list, to which the SNMP user

belongs. SNMP groups are defined in the

SNMP Group Profile Page

•

Authentication Method

— Indicates the Authentication method used. The possible field

values are:

–

MD5 Key

— Users are authenticated using the HMAC-MD5 algorithm.

–

SHA Key

— Users are authenticated using the HMAC-SHA-96 authentication level.

–

MD5 Password

— The HMAC-MD5-96 password is used for authentication. The user

should enter a password.

–

SHA Password

— Users are authenticated using the HMAC-SHA-96 authentication

level. The user should enter a password.

–

None

— No user authentication is used.

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands