Cisco Linksys SFE1000P Reference Manual Download

Page: 97 / 237

Chapter 7: Configuring VLANs
Defining Interface Settings

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

–

Admit All

— Indicates that both tagged and untagged packets are accepted on the port.

•

Ingress Filtering

— Ingress filtering discards packets which do not include an ingress port.

The possible values are:

–

Enable

— Ingress filtering is activated on the port.

–

Disable

— Ingress filtering is not activated on the port.

Modifying VLAN Interface Settings

Edit Ports Page

The

Edit Ports Page

contains the following fields:

•

Interface

— The port or LAG associated with this interface configuration.

•

VLAN Mode

— Indicates the port mode. Possible values are:

–

General

— The port belongs to VLANs, and each VLAN is user-defined as tagged or

untagged (full 802.1Q mode).

–

Access

— The port belongs to a single untagged VLAN. When a port is in Access mode,

the packet types which are accepted on the port (packet type) cannot be designated. It is
also not possible to enable/disable ingress filtering on an access port.

–

Trunk

— The port belongs to VLANs in which all ports are tagged (except for an

optional single native VLAN).

•

PVID

— Assigns a VLAN ID to untagged packets. The possible values are 2 to 4092, and

4095. Packets classified to the Discard VLAN are dropped.

•

Frame Type

— Packet type accepted on the port. Possible values are:

–

Admit Tag Only

— Indicates that only tagged packets are accepted on the port.

–

Admit All

— Indicates that both tagged and untagged packets are accepted on the port.

•

Ingress Filtering

— Ingress filtering discards packets which do not include an ingress port.

The possible values are:

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands