Cisco Linksys SFE1000P Reference Manual Download

Page: 92 / 237

Chapter 7: Configuring VLANs
Defining VLAN Properties

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

Defining VLAN Properties

The VLAN

Properties Page

provides information and global parameters for configuring and working

with VLANs.

Properties Page

The

Properties Page

contains the following fields:

•

VLAN ID

— Displays the VLAN ID.

•

VLAN Name

— Displays the user-defined VLAN name.

•

Type

— Displays the VLAN type. The possible field values are:

–

Dynamic

— Indicates the VLAN was dynamically created through GARP.

–

Static

— Indicates the VLAN is user-defined.

–

Default

— Indicates the VLAN is the default VLAN.

•

Authentication

— Indicates whether unauthorized users can access a Guest VLAN. The

possible field values are:

–

Enable

— Enables unauthorized users to use the Guest VLAN.

–

Disable

— Disables unauthorized users from using the Guest VLAN.

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands