Cisco Linksys SFE1000P Reference Manual Download

Page: 121 / 237

113

Chapter 10: Configuring Multicast Forwarding
Defining Multicast Forwarding

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

Defining Multicast Forwarding

The

Multicast Forward Page

contains fields for attaching ports or LAGs to a device that is attached to

a neighboring Multicast router/switch. Once IGMP Snooping is enabled, Multicast packets are
forwarded to the appropriate port or VLAN.

Multicast Forward Page

The

Multicast Forward Page

contains the following fields:

•

VLAN ID

— Displays the VLAN ID.

•

Ports

— Displays the Multicast Forwarding status of all of the device’s ports.

•

LAGs

— Displays the Multicast Forwarding status of all of the device’s LAGs.

•

Interface

— Indicates the port or LAG whose Multicast forwarding configuration is

described.

•

Interface Status

— Displays the interface status of the port or LAG. The options are as

follows:

–

Static

— Attaches the interface to the Multicast group as a static member.

–

Forbidden

— Forbidden interfaces are not included the Multicast group, even if IGMP

snooping designated the interface to join a Multicast group.

–

Dynamic

— Attaches the interface or LAG dynamically to the Multicast group.

–

Excluded

— The interface is not part of a Multicast group.

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands