manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

156

Chapter 13: Configuring Quality of Service

 

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

13

Configuring Quality of Service

Network traffic is usually unpredictable, and the only basic assurance that can be offered is best 
effort traffic delivery. To overcome this challenge, Quality of Service (QoS) is applied throughout the 
network. This ensures that network traffic is prioritized according to specified criteria, and that 
specific traffic receives preferential treatment. QoS in the network optimizes network performance 
and entails two basic facilities:

• Classifying incoming traffic into handling classes, based on an attribute, including:

–

The ingress interface

–

Packet  content

–

A combination of these attributes

• Providing various mechanisms for determining the allocation of network resources to 

different handling classes, including:

–

The assignment of network traffic to a particular hardware queue

–

The assignment of internal resources

–

Traffic shaping 

The terms Class of Service (CoS) and QoS are used in the following context: 

• CoS provides varying Layer 2 traffic services. CoS refers to classification of traffic to traffic-

classes, which are handled as an aggregate whole, with no per-flow settings. CoS is usually 
related to the 802.1p service that classifies flows according to their Layer 2 priority, as set in 
the VLAN header. 

• QoS refers to Layer 2 traffic and above. QoS handles per-flow settings, even within a single 

traffic class.

The QoS facility involves the following elements:

•

Access Control Lists (ACLs)

 — Used to decide which traffic is allowed to enter the system, 

and which is to be dropped. Only traffic that meets this criteria are subject to CoS or QoS 
settings. ACLs are used in QoS and network security.

•

Traffic Classification

 — Classifies each incoming packet as belonging to a given traffic 

class, based on the packet contents and/or the context.

•

Assignment to Hardware Queues

 — Assigns incoming packets to forwarding queues. 

Packets are sent to a particular queue for handling as a function of the traffic class to which 
they belong, as defined by the classification mechanism.

•

Traffic Class-Handling Attributes 

— Applies QoS/CoS mechanisms to different classes, 

including: Bandwidth Management

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

Panasonic KX-UDS124 Important Information Manual preview
KX-UDS124
Brand: Panasonic Pages: 44
8e6 Technologies Enterprise Filter Authentication R3000 Quick Start Manual preview
Enterprise Filter Authentication R3000
Brand: 8e6 Technologies Pages: 66
Wattle Pegasus Quick Installation Manual preview
Pegasus
Brand: Wattle Pages: 6
Baicells Nova430i Quick Manual preview
Nova430i
Brand: Baicells Pages: 8
Cabletron Systems Netlink FRX8000 Installation And Setup Manual preview
Netlink FRX8000
Brand: Cabletron Systems Pages: 94
Cabletron Systems MMAC-Plus 9E423-24 Reference Manual preview
MMAC-Plus 9E423-24
Brand: Cabletron Systems Pages: 10
Cabletron Systems MMAC-Plus 9A128-01 Management Manual preview
MMAC-Plus 9A128-01
Brand: Cabletron Systems Pages: 22
Cabletron Systems Spectrum EMM-E6 Addendum Manual preview
Spectrum EMM-E6
Brand: Cabletron Systems Pages: 2
Cabletron Systems SmartSTACK ELS100-24TXG Installation And User Manual preview
SmartSTACK ELS100-24TXG
Brand: Cabletron Systems Pages: 112
Cabletron Systems ESX-1380 Management Manual preview
ESX-1380
Brand: Cabletron Systems Pages: 86
Cabletron Systems DLM6C-AA Overview And Setup Manual preview
DLM6C-AA
Brand: Cabletron Systems Pages: 54
Cabletron Systems Cabletron BRIM-F6 User Manual preview
Cabletron BRIM-F6
Brand: Cabletron Systems Pages: 43
Cabletron Systems Netlink FRX4000 Maintenance Manual preview
Netlink FRX4000
Brand: Cabletron Systems Pages: 60
Cabletron Systems CSX200 CyberSWITCH Setup Manual preview
CSX200 CyberSWITCH
Brand: Cabletron Systems Pages: 2
Cabletron Systems 9E132-15 Appendix preview
9E132-15
Brand: Cabletron Systems Pages: 8
Cabletron Systems TRXI-22 Addendum preview
TRXI-22
Brand: Cabletron Systems Pages: 4
Ubiquiti NanoBeam M5 Setup preview
NanoBeam M5
Brand: Ubiquiti Pages: 3
D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network... User Manual preview
DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network...
Brand: D-Link Pages: 53

Brands by name

Popular brands

Load more brands