Cisco Linksys SFE1000P Reference Manual Download

Page: 203 / 237

195

Chapter 16: Configuring System Time

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

Defining SNTP Settings

The

SNTP Settings Page

contains information for enabling SNTP servers, as well as adding new

SNTP servers. In addition, the

SNTP Settings Page

enables the device to request and accept SNTP

traffic from a server.

SNTP Settings Page

The

SNTP Settings Page

contains the following fields:

•

Enable SNTP Broadcast

— Enables polling the selected SNTP Server for system time

information.

•

SNTP Server

— Indicates the SNTP server IP address. Up to eight SNTP servers can be

defined.

•

Poll Interval

— Defines the interval (in seconds) at which the SNTP server is polled for

system time information. By default, the poll interval is 1024 seconds.

•

Encryption Key ID

— Indicates the Key Identification used to communicate between the

SNTP server and device. The range is 1 - 4294967295.

•

Preference

— The SNTP server providing SNTP system time information. The possible field

values are:

–

Primary

— The primary server provides SNTP information.

–

Secondary

— The backup server provides SNTP information.

–

n progress

— The SNTP server is currently sending or receiving SNTP information.

–

Unknown

— The progress of the SNTP information currently being sent is unknown. For

example, the device is currently looking for an interface.

•

Status

— The operating SNTP server status. The possible field values are:

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands