manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

188

Chapter 15: Managing System Logs
Viewing Remote Logs

 

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

15

–

Critical

 — The third highest warning level. A critical log is saved if a critical device 

malfunction occurs; for example, two device ports are not functioning, while the rest of 
the device ports remain functional.

–

Error

 — A device error has occurred, for example, if a single port is offline.

–

Warning

 — The lowest level of a device warning. The device is functioning, but an 

operational problem has occurred.

–

Notice 

— The system is functioning properly, but system notice has occurred.

–

Informational

 — Provides device information.

–

Debug

 — Provides debugging messages.

Adding a System Log Server

The 

Add Syslog Server Page

 contains fields for defining new Remote Log Servers. 

Add Syslog Server Page

The 

Add Syslog Server Page 

contains the following fields: 

•

Log Server IP Address 

— Specifies the server to which logs can be sent.

•

UDP Port 

— Defines the UDP port to which the server logs are sent. The possible range is 1 

to 65535. The default value is 514. 

•

Facility 

— Defines a user-defined application from which system logs are sent to the remote 

server. Only one facility can be assigned to a single server. If a second facility level is 
assigned, the first facility is overridden. All applications defined for a device utilize the same 
facility on a server. The field default is Local 7. The possible field values are 

Local 0 - Local 7.

•

Description

 — Provides a user-defined server description.

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

IBM AS/400 Hardware User Manual preview
AS/400
Brand: IBM Pages: 104
IBM System Storage TS3100 Setup, Operator, And Service Manual preview
System Storage TS3100
Brand: IBM Pages: 375
JB Systems Scene Master Operation Manual preview
Scene Master
Brand: JB Systems Pages: 24
JB Systems CMX 24 User Manual preview
CMX 24
Brand: JB Systems Pages: 61
H3C CR16006-F Configuration Examples preview
CR16006-F
Brand: H3C Pages: 21
Draytek Vigor 2710e Quick Start Manual preview
Vigor 2710e
Brand: Draytek Pages: 8
Juniper MX2010 Hardware Manual preview
MX2010
Brand: Juniper Pages: 825
ZyXEL Communications XS1920 Series User Manual preview
XS1920 Series
Brand: ZyXEL Communications Pages: 422
UfiSpace S9600-28DX Hardware Installation Manual preview
S9600-28DX
Brand: UfiSpace Pages: 34
3Com 3C13640 Installation Manual preview
3C13640
Brand: 3Com Pages: 32
Zhone 6388-A2 User Manual preview
6388-A2
Brand: Zhone Pages: 53
Hama 49276 Operating Instruction preview
49276
Brand: Hama Pages: 7
Pullnet AGENT-2 S41D Line User Manual preview
AGENT-2 S41D Line
Brand: Pullnet Pages: 89
Extreme Networks Summit WM3400 Installation Manual preview
Summit WM3400
Brand: Extreme Networks Pages: 51
Riverbed SteelCentral NetExpress 470 Upgrade And Maintenance Manual preview
SteelCentral NetExpress 470
Brand: Riverbed Pages: 140
Patton electronics IpLink 2884 Quick Start Manual preview
IpLink 2884
Brand: Patton electronics Pages: 8
Positron TeleLite 720920 Series Manual preview
TeleLite 720920 Series
Brand: Positron Pages: 21
netsys NV-600W User Manual preview
NV-600W
Brand: netsys Pages: 243

Brands by name

Popular brands

Load more brands