manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

53

Chapter 5: Configuring Device Security
Defining Access Control

 

SFE1000P Gigabit Ethernet Switch Reference Guide

Chapter

5

•

Authentication Method

 — Displays the method by which the last session was authenticated. 

The possible field values are:

–

Remote

 — 802.1x authentication is not used on this port (port is forced-authorized).

–

None

 — The supplicant was not authenticated.

–

RADIUS

 — The supplicant was authenticated by a RADIUS server.

•

MAC Address

 — Displays the supplicant MAC address.

Defining Access Control

Access Control Lists (ACL) allow network managers to define classification actions and rules for 
specific ingress ports. Your switch supports up to 256 ACLs. Packets entering an ingress port, with 
an active ACL, are either admitted or denied entry. If they are denied entry, the user can disable the 
port. ACLs are composed of access control entries (ACEs) that are made of the filters that determine 
traffic classifications. The total number of ACEs that can be defined in all ACLs together is 256.

The Access Control section contains the following pages:

• Defining MAC Based ACL

• Defining IP Based ACL

• Defining ACL Binding

Defining MAC Based ACL

The 

MAC Based ACL Page

 page allows a MAC-based Access Control List (ACL) to be defined. The 

table lists Access Control Elements (ACE) rules, which can be added only if the ACL is not bound to 
an interface. 

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

MiLAN E-MCC-1600 Install Manual preview
E-MCC-1600
Brand: MiLAN Pages: 1
Symantec PacketShaper PS-S200 Quick Start Manual preview
PacketShaper PS-S200
Brand: Symantec Pages: 2
8e6 Technologies ER3-100 (5K02-55) Quick Start Manual preview
ER3-100 (5K02-55)
Brand: 8e6 Technologies Pages: 74
Abocom WM3111 Specification preview
WM3111
Brand: Abocom Pages: 1
insys icom EBW-E Quick Installation Manual preview
EBW-E
Brand: insys icom Pages: 4
Ubiquiti UniFi WiFi BaseStation XG Quick Start Manual preview
UniFi WiFi BaseStation XG
Brand: Ubiquiti Pages: 19
CG Emotron OSTO 100 Instruction Manual preview
Emotron OSTO 100
Brand: CG Pages: 112
ANEP P4GU VoLTE Technical Data Sheet preview
P4GU VoLTE
Brand: ANEP Pages: 48
Dahua NVR41-4KS2 Series User Manual preview
NVR41-4KS2 Series
Brand: Dahua Pages: 452
Xantech IR-X10 Installation Instructions Manual preview
IR-X10
Brand: Xantech Pages: 16
Allied Telesis AT-TN7100 User Manual preview
AT-TN7100
Brand: Allied Telesis Pages: 2
Kentrox RMM-1400 Configuration Manual preview
RMM-1400
Brand: Kentrox Pages: 246
Avocent Cyclades CS4008 Specifications preview
Cyclades CS4008
Brand: Avocent Pages: 2
Ubiquiti UFiber UF-WIFI Quick Start Manual preview
UFiber UF-WIFI
Brand: Ubiquiti Pages: 13
ADTRAN NetVanta 1224R Specifications preview
NetVanta 1224R
Brand: ADTRAN Pages: 4
VAMISOUND Schoeps electret Building Instructions preview
Schoeps electret
Brand: VAMISOUND Pages: 15
Planet Networking & Communication VRT-311 User Manual preview
VRT-311
Brand: Planet Networking & Communication Pages: 147
Tripp Lite N308-15M Specification Sheet preview
N308-15M
Brand: Tripp Lite Pages: 2

Brands by name

Popular brands

Load more brands