14-62
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 14 Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Removing and Replacing the Cisco ASR 1006 Router Power Supplies
Figure 14-43
shows the DC power supply terminal block for the ASR1013/06-PWR-DC power supply
of the Cisco ASR 1006 Router.
Figure 14-43
Cisco ASR 1006 Router DC Power Supply (ASR1013/06-PWR-DC) Terminal Block and
Plastic Cover
Step 5
Remove the slotted plastic cover from the terminal block (see
Figure 14-42
).
a.
Loosen and remove the single screw on the plastic cover. The plastic cover has slots that help to slide
it out diagonally from the terminal block.
b.
Using a nut driver (7/16 size), unsrew the positive kepnut, positive cable, and the flat washer, in that
order.
The terminal block houses two double-hole barrel lugs.
c.
Follow Step 4b and remove the negative cable.
1
Negative lead
3
Protective sleeving around the stud and cable
2
Positive lead
4
Ground stud and cable
OUTPUT INPUT
FAN
FAIL
OK
OK
ALARM
S
60V
1A MAX
This unit might have more than one power supply connection. All connections must be removed to de-energize the unit.
-4
8
/-60V 40A
253913
1
2
4
3
