14-30
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 14 Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Removing and Replacing the Cisco ASR 1000 Series DIMM Memory Modules
This section describes how to remove the chassis cover and then remove and replace the Cisco ASR 1001
Router DIMM.
Figure 14-20
shows the location of the DIMM and eUSB in the Cisco ASR 1001 Router.
Figure 14-20
Cisco ASR 1001 Router Internal Component Location
Removing the Cisco ASR 1001 Router DIMMs
Follow these steps to remove the Cisco ASR 1001 Router DIMM:
Step 1
With a wrist strap on, remove the power supplies from the chassis.
Note
The chassis cover cannot be removed until the power supplies are removed from the chassis.
For instructions about how to remove the AC and DC power supplies from the Cisco ASR 1001 Router,
see:
•
Removing AC Power Supply from the Cisco ASR 1001 Router, page 12-36
•
Removing DC Input Power from the Cisco ASR 1001 Router, page 12-43
1
Cisco ASR 1001 Router DIMM location (four
slots)
2
Cisco ASR 1001 Router eUSB location
279989
1
2
