14-76
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 14 Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Removing and Replacing the Cisco ASR 1002 Router Power Supplies
Note
Unless otherwise noted, the Cisco ASR 1002-F Router AC and –48 VDC power supply and removal and
installation remain the same as the Cisco ASR 1002 Router.
Removing and Replacing an AC Power Supply in Cisco ASR 1002 Router
This section provides information about removing and replacing an AC power supply in the Cisco
ASR 1002 Router.
Note
You must have both power supplies installed in the Cisco router.
The Cisco ASR 1002 Router has two of the same type power supplies in power supply slot 0 and power
supply slot 1.
Figure 14-53
shows the Cisco ASR 1002 Router AC power supply.
Figure 14-53
Cisco ASR 1002 Router AC Power Supply
Removing the AC Power Supply from Cisco ASR 1002 Router
To remove the AC power supply from the Cisco ASR 1002 Router, follow these steps:
Step 1
Slip on the ESD-preventive wrist strap that was included in the accessory kit.
Step 2
Turn the switch to the Off (O) position, remove wiring, and unplug the AC cord.
Step 3
Unscrew all of the power supply captive screws.
1
AC power supply ESD socket
5
Fan
2
AC power supply slot 0 label
6
Captive installation screw
3
AC power supply On (|) /Off (O) switch
7
AC power supply slot 1 label
4
AC power supply LEDs
8
AC power inlet
OUTPUT INPUT
FAIL
OK
OK
FAN
OUTPUT INPUT
FAIL
OK
OK
FAN
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
This unit might have more than
one power supply connection.
All connections must be removed
to de-energize the unit.
0
1
8
7
280288
4
1
5
6
3
2