manualshive.com logo in svg

Cisco ASR 1000 Series, Hardware Installation Manual

The Cisco ASR 1000 Series Configuration Manual is a comprehensive guide that enables users to optimize the performance of their ASR 1000 routers. It provides step-by-step instructions for configuring and deploying the device, ensuring a seamless network experience. Download this invaluable manual for free from our website manualshive.com.

Share
Download
background image

 

13-2

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide

OL-13208-11

Chapter 13      Cisco ASR 1000 Series Routers Power Up and Initial Configuration

Verifying Power Supply Operation

•

The console terminal is turned on.

•

You have determined the IP addresses for the Ethernet and serial interfaces. 

•

Empty card slots or card bays are filled with card blanks. This ensures proper air flow through the 
chassis and electromagnetic compatibility (EMC). 

You are now ready to start your router. 

Verifying Power Supply Operation

Follow this procedure to verify power supply is operating correctly.

Step 1

Check that the power supply LEDs are:

•

INPUT OK is green

•

FAN OK is green

•

OUTPUT FAILED is not illuminated

Step 2

To ensure that the power supply state is OK, type the 

show platform

 command. This output sample is 

from the Cisco ASR 1013 router. The other Cisco ASR 1000 routers display similar type of output.

The following output displays:

Router# 

show platform

Chassis type: ASR1013             

Slot      Type                State                 Insert time (ago) 

--------- ------------------- --------------------- ----------------- 

0         ASR1000-SIP40       ok                    22:56:46      

 0/0      SPA-5X1GE-V2        ok                    22:55:42      

 0/1      SPA-5X1GE-V2        ok                    22:55:36      

 0/2      SPA-5X1GE-V2        ok                    22:55:32      

 0/3      SPA-5X1GE-V2        ok                    22:55:28      

1         ASR1000-SIP40       ok                    22:56:46      

 1/0      SPA-5X1GE-V2        ok                    22:55:43      

 1/1      SPA-5X1GE-V2        ok                    22:55:40      

 1/2      SPA-5X1GE-V2        ok                    22:55:35      

 1/3      SPA-5X1GE-V2        ok                    22:55:30      

2         ASR1000-SIP10       ok                    22:56:46      

 2/0      SPA-5X1GE-V2        ok                    22:55:41      

 2/1      SPA-5X1GE-V2        ok                    22:55:33      

 2/2      SPA-5X1GE-V2        ok                    22:55:27      

 2/3      SPA-5X1GE-V2        ok                    22:55:22      

3         ASR1000-SIP40       ok                    22:56:46      

 3/0      SPA-3XOC3-ATM-V2    ok                    22:55:43      

 3/1      SPA-4X1FE-TX-V2     ok                    22:55:41      

 3/2      SPA-1XCHSTM1/OC3    ok                    22:55:35      

 3/3      SPA-8XCHT1/E1       ok                    22:55:32      

4         ASR1000-SIP40       ok                    22:56:46      

 4/0      SPA-1X10GE-L-V2     ok                    22:55:43      

 4/1      SPA-2XCT3/DS0       ok                    22:55:41      

 4/2      SPA-2X1GE-V2        ok                    22:55:34      

 4/3      SPA-1XOC12-POS      ok                    22:55:32      

5         ASR1000-SIP10       ok                    22:56:46      

 5/0      SPA-4XT-SERIAL      ok                    22:55:39      

 5/1      SPA-4XOC3-POS       ok                    22:55:34      

 5/2      SPA-5X1GE-V2        ok                    22:55:26      

 5/3      SPA-2XT3/E3         ok                    22:55:22      

Summary of Contents for ASR 1000 Series



















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ASR 1000 Series

Kasda LinkSmart KW6515 User Manual preview
LinkSmart KW6515
Brand: Kasda Pages: 31
Extron electronics PoleVault System A/V Source Inputs Specification Sheet preview
PoleVault System A/V Source Inputs
Brand: Extron electronics Pages: 4
E-Lins H900 Series Quick Start Manual preview
H900 Series
Brand: E-Lins Pages: 9
ZyXEL Communications NBG318S v2 Specifications preview
NBG318S v2
Brand: ZyXEL Communications Pages: 2
Xircom RealPort Ethernet 10/100 User Manual preview
RealPort Ethernet 10/100
Brand: Xircom Pages: 30
Tektronix CTS 850 User Manual preview
CTS 850
Brand: Tektronix Pages: 178
Juniper NFX250 Quick Start Manual preview
NFX250
Brand: Juniper Pages: 7
NC-link NC-AP111 User Manual preview
NC-AP111
Brand: NC-link Pages: 20
AC&NC JetStor NAS 724UX User Manual preview
JetStor NAS 724UX
Brand: AC&NC Pages: 117
IBM 2078-4F4 Quick Installation Manual preview
2078-4F4
Brand: IBM Pages: 130
IBM Nways 2216 Service And Maintenance Manual preview
Nways 2216
Brand: IBM Pages: 168
Clas Ohlson AE222X1 Quick Start Manual preview
AE222X1
Brand: Clas Ohlson Pages: 4
Paradyne SMD2000-24E Installation Instructions Manual preview
SMD2000-24E
Brand: Paradyne Pages: 28
Xtatix XCA-PDSI User Manual preview
XCA-PDSI
Brand: Xtatix Pages: 12
CTC Union Skywave Instruction preview
Skywave
Brand: CTC Union Pages: 12
Tripp Lite N201-100-GY-P Specification Sheet preview
N201-100-GY-P
Brand: Tripp Lite Pages: 2
Cambium Networks PTP 850E Installation Manual preview
PTP 850E
Brand: Cambium Networks Pages: 99
Mellanox Technologies SwitchX-2 MSX1024B-1BFS Installation Manual preview
SwitchX-2 MSX1024B-1BFS
Brand: Mellanox Technologies Pages: 31

Brands by name

Popular brands

Load more brands