3-3
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 3 Cisco ASR 1000 Series Routers Embedded Services Processors
Cisco ASR 1000-ESP20
•
Cisco ASR1000-ESP10-N—The Cisco ASR1000 Embedded Services Processor 10G Non Crypto
Capable board provides an ASR 1000 series router solution for customers who are under export
restrictions and not qualified to implement products that support strong encryption services. The
Cisco ASR1000 Embedded Services Processor 10G Non Crypto Capable feature support is the same
as the Cisco ASR100-ESP10 except that SSH, SSL and IPSec VPN services are not supported. For
detailed information about this feature, see
Cisco ASR 1000 Series Aggregation Services Routers
Software Configuration Guide
and
Cisco ASR 1000 Embedded Services Processor 10G Non Crypto
Capable Feature Guide.
The ASR1000-ESP10-N has the same performance characteristics as the ASR1000-ESP10 but does
not support encryption services.
Cisco ASR 1000-ESP20
Cisco ASR 1000-ESP20 supports the Cisco ASR 1006 Router and ASR 1004 Router. Performance
highlights of the Cisco ASR1000-ESP20 include hardware-assisted policing, encryption capability of 8
Gbps, and special jitter- and latency-minimizing multicast packet replication.
Cisco ASR 1000-ESP20 supports 1Gb Cisco QuantumFlow Processor, 4Gb DRAM, 40Mb TCAM, and
256Mb packet buffer memory and high availability 1 + 1 redundancy in dual ESP configuration in
combination with the Cisco ASR 1006 Router.
Cisco ASR 1000-ESP40
Cisco ASR1000-ESP40 is a field-replaceable unit (FRU) capable of supporting online insertion and
removal (OIR) operation in conjunction with one or two route processors, a secondary forwarding
processor, and up to six SPA carrier cards.
Cisco ASR 1000-ESP40 is a CPP-based forwarding processor for the Cisco ASR1000 Series Routers.
Cisco ASR 1000-ESP40 is supported on the following routers:
•
Cisco ASR 1006 Router
•
Cisco ASR 1004 Router
•
Cisco ASR 1013 Router
The Cisco ASR1000-ESP40G supports:
•
ESI (enhanced serial interface) punt path support for dual redundant ASR 1000 route processors
with a bandwidth of 11 Gbps
•
ESI state path support for redundant ASR 1000 forward processors
•
Dual ESI support for four carrier cards (in slots 0 though 3) and single ESI support for two carrier
cards (in slots 4 and 5).
•
Total bandwidth or throughput of 40 Gbps
It provides 40 Gbps bandwidth per system and at least 10 Gbps aggregated security traffic.
All initial Cisco ASR 1000 Series Embedded Services Processors are based on a common
highly-programmable network Cisco QuantumFlow Processor (packet processing). The Cisco ASR 1013
Router slots are keyed using rotated guide pins so that plug-in cards can only be fully inserted in slots
where they are intended to operate. This keying prevents cards from making midplane contact in slots
the cards are not allowed.
