12-33
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 12 Cisco ASR 1001 Router Overview and Installation
Cisco ASR 1001 Router Power Supply Installation
Note
The Cisco ASR 1001 Router can support two AC or two DC power supplies. Do not mix AC and DC
power supply units in the same chassis.
Figure 12-21
shows both the AC and DC power supplies for the Cisco ASR 1001 Router.
Figure 12-21
Cisco ASR 1001 Router AC Power Supply and DC Power Supply
Table 12-8
describes the power supply LED. The function of the LED is the same for both the AC and
DC power supplies.
1
AC and DC power supply fasteners
5
DC power supply positive (+) connection
2
AC power supply inlet
6
DC power supply ground symbol
3
Power supply LED
7
DC power supply terminal block connection
4
DC power supply negative (-) connection
8
AC and DC power supply handles
-4
8
V/-60V 14A
5
6
2
4
1
1
3
8
7
8
1
20769
3
100-240 V~
5-2A
50-60Hz
3
1
Table 12-8
Cisco ASR 1001 Router AC and DC Power Supply LED
LED Color and State
Description
Solid green
Power output is on and within the normal operating range.
Blinking green, at the rate of one
blink per second
Input power that is within the normal operating range is being
supplied, but the Standby switch is in the Standby position (and
not in the On position).
Solid amber
A power supply critical event has occurred, and the power
supply has shut down. The critical event can be temperature,
voltage, current, or fan operating outside the normal operating
range.
Blinking amber, at the rate of one
blink per second
A power supply warning event has occurred, but the power
supply can continue to operate. The warning event can be
temperature, voltage, current, or fan operating outside the
normal operating range.
Off
Power supply is shut down.
