1-187
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
show table-map
show table-map
To display the configuration of a specified table map or all table maps, use the
show table-map
command in EXEC mode.
show table-map
table-map-name
Syntax Description
Command Modes
EXEC
Command History
Examples
The sample output of the
show table-map
command shows the contents of a table map called “map 1”.
In “map1”, a “to–from” relationship has been established and a default value has been defined. The fields
for establishing the “to–from” mappings are further defined by the policy map in which the table map
will be configured. (Configuring a policy map is the next logical step after creating a table map.)
For instance, a precedence or differentiated services code point (DSCP) value of 0 could be mapped to
a class of service (CoS) value of 1, or vice versa, depending on the how the values are defined in the
table map. Any values not explicitly defined in a “to–from” relationship will be set to a default value.
The following sample output of the
show table-map
command displays the contents of a table map
called “map1”. In this table map, a packet-marking value of 0 is mapped to a packet-marking value of 1.
All other packet-marking values are mapped to the default value 3.
Router#
show table-map map1
Table Map map1
from 0 to 1
default 3
Table 1-11
describes the fields shown in the display.
table-map-name
Name of table map used to map one packet-marking value to another. The
name can be a maximum of 64 alphanumeric characters.
Release
Modification
15.1(2)SNG
Support for this command was introduced on the Cisco ASR 901 router.
Table 1-11
show table-map Field Descriptions
Field
Description
Table Map
The name of the table map being displayed.
from, to
The values of the “to–from” relationship established by the
table-map
(value mapping) command and further defined by the policy map in which
the table map will be configured.
default
The default action to be used for any values not explicitly defined in a
“to–from” relationship by the
table-map
(value mapping) command. If a
default action is not specified in the table-map (value mapping) command,
the default action is “copy”.
