Christie DS+4K, User Manual

Page: 63 / 144

Section 3: Operation
User’s Manual 3-41
.
Figure 3.19. CIE 1931 Chromaticity Diagram
NOTE: Keep new x,y coordinates within the original color gamut triangle shown
here. See Section 6 – Specification for color primaries.
PROCEDURE FOR X,Y ADJUSTMENTS:
See 3.10, Using Multiple Projectors.
COLOR SATURATION: Use this
submenu if you do not have specific
color coordinates in mind and will
simply judge color performance by
eye (or meter).
Like the Color
Adjustment by X,Y submenu, each
color control actually defines new
x/y coordinates for that color and
changes its hue--it is just a
different interface.
Adjust the hue of each primary
color (red, green, blue, and white)
by using more or less of it in
relation to the other colors.
NOTE: A Color Saturation
adjustment sets the corresponding x/y coordinates shown in the Color Adjustment by
X,Y submenu. These x/y coordinates will remain stable for this User gamut until they
are changed again via either menu. Values displayed in the Color Saturation menu,
however, will likely fluctuate as you use the projector, and will be different when you
return to this menu at some point in the future. These floating changes do not affect
the x/y coordinates or gamut.
PROCEDURE FOR USING COLOR SATURATION:
See 3.10, Using Multiple Projectors.
Figure 3.20. Customize Color