Christie DS+4K, User Manual

Page: 81 / 144

Section 3: Operation
User’s Manual 3-59
.
Figure 3.32. Copy X/Y Values into All Projectors
6. In each projector, judge by eye and adjust x/y coordinates slightly in the following
manner:
To match reds, decrease “
Red X” until full field red
screens match.
To match greens, decrease
“Green Y” until full field
green screens match.
To match blues, increase both
“Blue X” and “Blue Y” until
full field blue screens match.
NOTE: For speed, enable the
“Auto Color Enable” checkbox.
Each color coordinate you select will then automatically trigger a full field display
of the corresponding color.
These coordinate adjustments move
the three color points closer together
(see right) to establish a “shared”
gamut attainable by all projectors in
your group. Adjust only as necessary
to ensure that the resulting color
palette is as large as possible. When
done, you may need to adjust lamp
power slightly.
7. All screens should now be color-matched. Apply this new “User” gamut to a
source at any time by selecting it in the “Select Color Adjustment” list accessed in
the Advanced Image Settings menu.