Christie DS+4K, User Manual

Page: 17 / 144

Section 2: Installation and Setup
User’s Manual 2-13
.
Figure 2.8. Connecting RGB and Sync
NOTES: 1) If for some reason the projector fails to recognize a signal as an RGB
signal, specify this Color Space option within the Image Settings menu. See 3.5
Adjusting the Image. 2) To connect YPbPr signals–such as from DVDs or analog HDTV
sources–to
INPUT 1
, use the red, green and blue BNCs as described in YPbPr Signals
(below).
Connect a YPbPr signal (component video) to
INPUT 1
or
INPUT 2
as shown in Figure
2.9.
NOTES: 1) If, for some reason, the projector fails to recognize a YPbPr signal,
specify this Color Space option within the Image Settings menu. See 3.5, Adjusting
the Image. 2) Do not connect digital component signals (known as YCbCr) to
INPUT
1
. Install an appropriate optional module in
INPUT 5
or
INPUT 6
for this.
Figure 2.9. Connecting YPbPr sources
YPbPr Signals
'
(COMPONENT VIDEO)