Canon iR7086, Service Manual

Page: 95 / 735

Chapter 2
2-37
F-2-155
[1] Paper movement
2.2.25 Setting the Cassette
0010-8964
iR7105 / iR7095 / iR7086 / iR7095P
1) Press the release button of cassette 3/4, and slide out the cassette.
2) Fit the side guide plate [1] in the hole (A4/A3) identified by the marking
M [2].
F-2-156
3) Fit the included inch block from inside the cassette so that the hole
(STMT-R) of marking A [1] and the hole (LTR-R) of marking H [2] are
covered.
F-2-157
4) Put the cassettes back in the machine.
2.2.26 Correcting the Skew
0011-4484
iR7105 / iR7095 / iR7086 / iR7095P
If paper from the left/right deck moves askew, go through the following:
1) Loosen the 2 screws [1].
2) Push the side guide plate (front) [2] against the paper.
F-2-158
3) With the side guide plate (front) against the paper, tighten the screw.
2.2.27 Switching Over the Paper Size for the Front Deck
(right, left)
0010-8997
iR7105 / iR7095 / iR7086 / iR7095P
1) Press the front deck release button, and slide out the deck.
2) Remove the screw [2] of the rear guide plate [1], and fix the guide plate in
place to match the size specified by the user.
F-2-159
3) Remove the screw [2] from the left/right guide plate [1], and fix the guide
plate in place to match the size specified by the user.
F-2-160
4) Put paper in the front deck.
5) Close the front deck.
6) Choose the appropriate deck size label [1] from the backing paper (cas-
sette/deck), and attach it to the paper size plate of the deck.
F-2-161
- Be sure there is no gap.
- Perform the foregoing steps if the user is going to use AB series sheets
only.
image
Lf
[1]
[1]
[2]
[1]
[2]
[1] [2]
[1]
[2]
[1]
[2]
[1]