Canon iR7086, Service Manual

Page: 93 / 735

Chapter 2
2-35
F-2-144
2.2.22 Adjusting the Horizontal Registration
0012-2060
iR7095P
<Cassette 3/4>
1) Press the release button of cassette 3/4, and slide out the cassette.
2) Detach the cassette front cover [1] in the direction of the arrow.
- 2 screws [2]
F-2-145
3) Loosen the 2 fixing screws [1] found on the right/left of the cassette.
4) Move the cassette case [2] to the front or the rear to make adjustments.
- move it to the rear to decrease the horizontal registration (left margin).
- move it to the front to increase the horizontal registration (left margin).
F-2-146
5) Check to make sure that the horizontal registration (left margin) on prints
using cassette 3/4 as the source of paper is 2.5 +/-1.5 mm.
F-2-147
[1] Paper movement
6) When done, tighten the 2 fixing screws loosened in step 3).
7) Shift up the cassette front cover [1] in the direction of the arrow, and se-
cure it in place using 2 screws [2].
F-2-148
8) Put cassette 3/4 back inside the machine.
9) When done, execute the following service mode items:
Cassette 3
COPIER > FUNCTION > CST > C3-STMTR
COPIER > FUNCTION > CST > C3-A4R
Register the paper width basic value for cassette 3.
9-1) Place STMTR paper in the cassette 3, and move the side guide plate
to suit the STMTR width.
9-2) Select C3-STMTR in service mode to highlight, and press the OK
key so that adjustment will be executed and the value will be registered
automatically.
9-3) Likewise, repeat steps 9.1) and 9.2) for A4R.
Cassette 4
COPIER > FUNCTION > CST > C4-STMTR
COPIER > FUNCTION > CST > C4-A4R
Perform the work you performed for cassette 3.
10) Exit the service mode.
<Front Deck Left/Right>
1) Press the release button of the front deck (left/right), and slide out the
deck.
2) Loosen the 4 screws [1].
Wl
0
2
4
6
8
10
0
2
4
6
8
10
[1]
[2]
[1]
[1]
[2]
[2]
image
L1
[1]
[1]
[2]