manualshive.com logo in svg

Canon iR7086, Service Manual

The Canon iR7086 boasts an impressive array of features, coupled with its easy operation manual, making it a perfect choice for businesses. Experience seamless navigation with this user-friendly machine, and download the comprehensive manual for free from manualshive.com, to harness the full potential of this remarkable product.

Share
Download
background image

Contents

Contents

9.1 Construction ...................................................................................................................................................................9-1

9.1.1 Outline.......................................................................................................................................................................................... 9-1

9.1.2 Major Components....................................................................................................................................................................... 9-1

9.1.3 Overview of the Fixing Drive System ......................................................................................................................................... 9-2

9.1.4 Controlling the Fixing Roller Drive............................................................................................................................................. 9-3

9.1.5 Controlling the Cleaning Web Drive ........................................................................................................................................... 9-3

9.1.6 Controlling the Thermistor Reciprocating Mechanism ............................................................................................................... 9-4

9.1.7 Controlling the Upper Separation Claw Reciprocating Mechanism............................................................................................ 9-4

9.1.8 Controlling the Fixing Inlet Sensor Drive ................................................................................................................................... 9-5

9.2 Basic Sequence ..............................................................................................................................................................9-6

9.2.1 Basic Sequence of Operations ..................................................................................................................................................... 9-6

9.3 Various Control Mechanisms.........................................................................................................................................9-6

9.3.1 Controlling the Fixing Roller Temperature ................................................................................................................................. 9-6

9.3.1.1 Controlling the Down Sequence .....................................................................................................................................................................9-6

9.3.1.2 Transparency Mode.........................................................................................................................................................................................9-7

9.3.1.3 Heavy Paper Mode ..........................................................................................................................................................................................9-8

9.3.1.4 Power Save Mode ...........................................................................................................................................................................................9-8

9.4 Protective Functions.......................................................................................................................................................9-9

9.4.1 Error Detection............................................................................................................................................................................. 9-9

9.5 Parts Replacement Procedure.......................................................................................................................................9-11

9.5.1 Fixing Unit ................................................................................................................................................................................. 9-11

9.5.1.1 Removing the Fixing Assembly....................................................................................................................................................................9-11

9.5.2 Upper Fixing Roller ................................................................................................................................................................... 9-12

9.5.2.1 Removing the Fixing Upper Roller...............................................................................................................................................................9-12

9.5.2.2 Mounting the Fixing Upper Roller................................................................................................................................................................9-13

9.5.3 Lower Fixing Roller................................................................................................................................................................... 9-13

9.5.3.1 Removing the Lower Fixing Roller ..............................................................................................................................................................9-13

9.5.3.2 Adjusting the Lower Roller Pressure (nip) ...................................................................................................................................................9-13

9.5.4 External Delivery Roller ............................................................................................................................................................ 9-14

9.5.4.1 Removing the External Delivery Roller........................................................................................................................................................9-14

9.5.5 Internal Delivery Roller ............................................................................................................................................................. 9-14

9.5.5.1 Removing the Internal Delivery Roller.........................................................................................................................................................9-14

9.5.6 Main Thermistor ........................................................................................................................................................................ 9-14

9.5.6.1 Removing the Main Thermistor ....................................................................................................................................................................9-14

9.5.6.2 Mounting the Main Thermistor .....................................................................................................................................................................9-15

9.5.7 Sub Thermistor........................................................................................................................................................................... 9-15

9.5.7.1 Removing the Sub Thermistor ......................................................................................................................................................................9-15

9.5.8 Thermal Switch .......................................................................................................................................................................... 9-15

9.5.8.1 Removing the Thermal Switch Unit .............................................................................................................................................................9-15

9.5.8.2 Mounting the Thermal Switch Unit ..............................................................................................................................................................9-16

9.5.9 Fixing Heater ............................................................................................................................................................................. 9-16

9.5.9.1 Removing the Main/Sub Heater....................................................................................................................................................................9-16

9.5.9.2 Mounting the Main/Sub Heater.....................................................................................................................................................................9-16

9.5.9.3 Points to Note When Mounting the Fixing Heater........................................................................................................................................9-16

9.5.10 Fixing Cleaning Belt ................................................................................................................................................................ 9-17

9.5.10.1 Removing the Fixing Cleaning Belt............................................................................................................................................................9-17

9.5.10.2 Mounting the Fixing Cleaning Belt.............................................................................................................................................................9-17

9.5.11 Claw Jam Sensor...................................................................................................................................................................... 9-18

9.5.11.1 Removing the Claw Jam Sensor .................................................................................................................................................................9-18

9.5.12 External Delivery Sensor ......................................................................................................................................................... 9-18

9.5.12.1 Remove the External Delivery Sensor ........................................................................................................................................................9-18

9.5.13 Internal Delivery Sensor .......................................................................................................................................................... 9-18

Summary of Contents for iR7086
































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iR7086

Xerox 7142 Service Manual preview
7142
Brand: Xerox Pages: 341
Macherey-Nagel NANOCOLOR UV/VIS II User Manual preview
NANOCOLOR UV/VIS II
Brand: Macherey-Nagel Pages: 6
Oce sx1481 User Manual preview
sx1481
Brand: Oce Pages: 192
Oce OP20 Operation Manual preview
OP20
Brand: Oce Pages: 22
Oce FX3000 SERIES Quick Setup Manual preview
FX3000 SERIES
Brand: Oce Pages: 41
Oce fx2081 Installation Manual preview
fx2081
Brand: Oce Pages: 28
Oce im5530 Specifications preview
im5530
Brand: Oce Pages: 6
QMS 2560 Options Installation preview
2560
Brand: QMS Pages: 104
Oce im2330 Printing Manual preview
im2330
Brand: Oce Pages: 386
Oce im2330 Specifications preview
im2330
Brand: Oce Pages: 2
Oce cm2520 Safety Information & Getting Started preview
cm2520
Brand: Oce Pages: 27
Oce im2330 Operator'S Manual preview
im2330
Brand: Oce Pages: 324
Pinnacle Technology PP7X Series Operation Manual preview
PP7X Series
Brand: Pinnacle Technology Pages: 76
Duplo DP - M400 Instruction Manual preview
DP - M400
Brand: Duplo Pages: 123
Roland Texart RT-640 Setup Manual preview
Texart RT-640
Brand: Roland Pages: 44
MIMAKI UJV500 Series Quick Start Manual preview
UJV500 Series
Brand: MIMAKI Pages: 2
Ricoh MP 2001 Operating Instructions Manual preview
MP 2001
Brand: Ricoh Pages: 156
Xerox DocuPrint 4050 NPS Message Manual preview
DocuPrint 4050 NPS
Brand: Xerox Pages: 248

Brands by name

Popular brands

Load more brands