Canon iR7086, Service Manual

Page: 226 / 735

Chapter 5
5-40
F-5-165
2) Remove the 2 cable fixing screws [2] of the No. 1 mirror base [1].
3) Remove the cable fixing screws [3].
4) Free the 2 hooks [4] of the cable from the right side of the reader unit
frame.
5) Detach the cable for the pulleys.
F-5-166
5.4.13.4 Fitting the Scanner Drive Cable
0011-7983
iR7105 / iR7095 / iR7086
1) Put the ball of the cable into the hole of the drive pulley [1], and wind the
cable (4 times inside; 5 times outside); then, tape it in place. At this time,
make sure that the cable fixing [2] is on the inside.
2) Fit the cable on the pulleys; then, fit one end on the left side hook [3] and
the other end on the right side hook [4].
3) Temporarily fix the cable fixing plate [2] in place on the No. 1 mirror base
[5].
4) Mount the reader unit upper frame.
F-5-167
F-5-168
5.4.13.5 Adjusting the Position of the No. 1/No. 2 Mirror
Base
0011-9470
iR7105 / iR7095 / iR7086
1) Arrange the mirror positioning tool (FY9-3009-040) so that it is ready for
use in the machine (by changing the pin position; REAR).
[1] [1] [1]
[1]
[1]
[2]
[1]
[2]
[2]
[4]
[4]
[1]
[3]
[4]
[4]
[5]
[3] [3]
[1]
[1]
[2]
[2]
[4]
[4]
[5]