Canon iR7086, Service Manual

Page: 217 / 735

Chapter 5
5-31
F-5-99
F-5-100
5.4.8.3 Removing the Scanner Motor
0011-8657
iR7105 / iR7095 / iR7086
1) Slide out the reader power supply cover [1].
- 4 screws [2]
- Free the cable from the wire saddle found behind the cover.
F-5-101
2) Disconnect the connector [1] of the interface PCB.
F-5-102
3) Shift the scanner motor [1] in the direction of the arrow to detach.
- 2 springs [2]
- 3 screws [3]
F-5-103
5.4.8.4 Mounting the Scanner Motor
0011-7978
iR7105 / iR7095 / iR7086
When mounting the scanner motor, check to be sure that the timing belt [3]
is properly fitted to the scanner pulley [1] and the motor shaft [2].
F-5-104
F-5-105
5.4.9 ADF Open/Close Sensor
5.4.9.1 Before Starting the Work
0011-8671
iR7105 / iR7095
1) Remove the reader rear cover.
2) Remove the reader upper rear cover.
3) Remove the interface PCB cover.
5.4.9.2 Removing the ADF Open/Closed Sensor
0011-8672
iR7105 / iR7095
1) Remove the sensor mounting plate [1].
- 1 connector [2]
- 1 screw [3]
[2]
[1]
[2]
[1]
[2] [2]
[1]
[1]
[2]
[2]
[3]
[1] [3]
[3] [2]