Canon iR7086, Service Manual

Page: 281 / 735

Chapter 7
7-35
F-7-63
7.10.6 Drum Cleaner Unit
7.10.6.1 Construction
0010-8829
iR7105 / iR7095 / iR7086
F-7-64
7.10.6.2 Removing the Cleaning Blade
0010-8830
iR7105 / iR7095 / iR7086
1) Slide out the process unit.
2) Remove the screw [1], and detach the reciprocating arm [2].
F-7-65
3) Disconnect the 2 connectors [1], and remove the 5 screws [2]; then, lift the
rear and push it in to detach the cleaning blade together with the mounting
plate [3].
F-7-66
4) Remove the E-ring [1], and detach the pressure plate [2] to detach the
cleaning blade assembly [3].
F-7-67
The pressure plate looks like the one used for the GP600 Sires or iR8500 Se-
ries machines; however, it is a different part with a different parts number.
Do not use the wrong part.
5) Remove the blade vibration unit from the cleaner blade unit.
6) Remove the 5 screws [1], and detach the blade retaining plate [2] to detach
the cleaning blade [3].
F-7-68
7.10.6.3 Mounting the Cleaning Blade
0010-8832
iR7105 / iR7095 / iR7086
See "Maintenance and Inspection".
7.10.6.4 Removing the Blade Vibrating Unit
0010-8833
iR7105 / iR7095 / iR7086
1) Remove the blade unit.
2) Disconnect the connector [1], and remove the 2 screws [2]; then, detach
the blade vibrating unit [3].
(The rear and front blade vibrating units may be disassembled in the same
way.)
[1]
[2]
[3]
Cleaning blade
Blade vibration unit
Separation claw
[1]
[2]
[1]
[1]
[3]
[2]
[1] [2] [3]
[2]
[3]
[1]