Canon iR7086, Service Manual

Page: 575 / 735

Chapter 16
16-11
XX= "01" to "FF"
T-16-4
XX YY
XX
CHK-
TYPE
Partition Description
Occurrence at time of
start-up
Occurrence during
normal execution
03 05
00,01,0
2,04
11,21 13,25
10,12,14,
22,23,24
Action Action
01
1
FSTDEV compressed image data (e.g., Box)
*1 *5
*9 *10 *11 *12
02 IMG_MNG file management table, profile
03 FSTCDEV job archiving (changing)
04
2
APL_GEN general-purpose data
05 TMP_GEN
general-purpose data (temporary file)
06 TMP_FAX
not used
07 TMP_PSS for PDL spool (temporary file)
08 3 PDLDEV PDL-related file
09 4 BOOTDEV
firmware (system, MEAP, key, certificate, PDF dictionary, RUI,
content, voice dictionary)
*3 *8
10 5 APL_MEAP MEAP application *1 *5
11 6 APL_SEND
address book, filter
*2 *6
12 7 APL_KEEP
for non-initialization data storage
*3 *8
13 8 APL_LOG system log *1 *5
FF 0 not specified
check for and recovery of HDD full-fault sectors
*4 *7
YY Description Action
*1
03
The ongoing write operation is
interrupted (at start-up).
- Set the partition number in question for CHK-TYPE, and execute HD-CLEAR; then, turn off and then back
on the power.
- Enter CHK-TYPE in question (for the partition), and execute HD-CLEAR; then, turn off and then back on
the power.
*2
- Ask the user to download the address book data using a remote UI.
- Set the partition number in question for CHK-TYPE, and execute HD-CLEAR; then, turn off and then back
on the power.
- Start download mode, and perform full formatting using the SST and reinstall the system software; then turn
off and then back on the power.
*3
The recovery operation for the boot partition is not possible without the use of the SST in save mode.
- Set CHK-TYPE=0, and execute HD-CHECK; then, turn off and then back on the power.
- Start download mode, and perform full formatting using the SST and reinstall the system software; then,
turn off and then back on the power.
*4
- Set CHK-TYPE=0, and execute HD-CHECK; then, turn off and then back on the power.
- Set CHK-TYPE=1, 2, 3, 5, and execute HD-CLEAR; then, turn off and then back on the power.
*5
05 A file system error has occurred.
- Enter CHK-TYPE in question (for the partition), and execute HD-CLEAR; then, turn off and then back on
the power.
- Replace the HDD, and reinstall the system software.
*6
The machine is designed so that execution of HD-CLEAR is not possible in service mode (so as to prevent
loss of information, e.g., address book, filter information).
- Ask the user to download the address book data using a remote UI.
- In service mode, start download mode, and execute full formatting using the SST and reinstall the system
software; then, turn off and then back on the power.
*7
- Set CHK-TYPE=1, 2, 3, 5, and execute HD-CLEAR; then, turn off and then back on the power.
- Replace the HDD, and reinstall the system software.
*8
The recovery operation for the boot partition is not possible without the use of the SST in save mode.
- Start up in safe mode, and execute full formatting using the SST and reinstall the system software; then, turn
off and back on the power.
- Replace the HDD, and reinstall the system software.
*9
00
01
02
04
The HDD has poor contact, or a
system error has occurred.
- Check the cable and the power cord.
- Start up in safe mode, and execute full formatting using the SST and reinstall the system software; then, turn
off and back on the power.
- Replace the HDD, and reinstall the system software.
*10
11
21
The HDD has poor contact.
- Check the cable and the power cord.
- Replace the HDD, and reinstall the system software.
*11
13
25 The ongoing write operation has
been interrupted.
There is a strong possibility of damage in the file data (e.g., Box) stored on the HDD.
- Set the partition number in question for CHK-TYPE, and execute HD-CHECK; then, turn off and back on
the power.
- Set the partition number in question for CHK-TYPE, and execute HD-CLEAR; then, turn off and back on
the power.
(In the case of BOOTDEV, BOOTDEV2 or APL_SEND, execute reformatting using the SST, and reinstall
the system software.)
- Replace the HDD, and reinstall the system software.