Canon iR7086, Service Manual

Page: 638 / 735

Chapter 17
17-50
<Clutch>
<Motor>
<Solenoid>
<CLEAR>
T-17-41
Code Name Code Name Code Name
1 manual feeder tray pickup clutch (CL7) 8 deck (left) pickup clutch (CL11) 15 registration brake clutch (CL3)
2 cassette 3 pickup clutch (CL12) 9 vertical path 2 clutch (CL9) 16 manual feeder tray transport clutch (CL18)
3 vertical path 3 clutch (CL13) 10 pre-registration clutch (CL5) 17 buffer inside magnet roller drive clutch
(CL1)
4 cassette 4 pickup clutch (CL14) 11 lower transport middle clutch (CL16) 18 developing cylinder clutch (CL4)
5 vertical path 4 clutch (CL15) 12 lower transport right clutch (CL17) 19 registration roller clutch (CL2)
6 deck (right) pickup clutch (CL10) 13 deck (left) transport clutch (CL19) 20 side paper deck transport clutch (CL101)
7 vertical path 1 clutch (CL8) 14 delivery speed switchover clutch (CL21) 21 side paper deck pickup clutch (CL102)
Code Name Code Name
1 drum motor (M0) 8 horizontal registration motor (M15)
2 main motor (M1) 9 duplexing reversal motor (M11)
3 pickup motor (M2) 10 duplexing transport motor (M12)
4 fixing motor (M3) 11 deck main motor (M101)
5 laser scanner motor (M4) 12 vibration motor1 (M10)
6 sub hopper inside toner feed motor (M22) 13 vibration motor2 (M20)
7 buffer motor (M18)
Code Name Code Name
1 deck (right) pickup solenoid (SL7) 7 delivery flapper solenoid (SL3)
2 deck (left) pickup solenoid (SL8) 8 reversal flapper solenoid (SL11)
3 deck 3 pickup solenoid (SL9) 9 fixing web solenoid (SL2)
4 cassette 4 pickup solenoid (SL10) 10 fixing feed unit lock solenoid (SL4) lock
5 manual feed pickup clutch solenoid (SL6)
(The manual feeder pickup roller moves up.) 11 fixing transport unit lock solenoid (SL4) unlock
12 not used
6 manual feeder pickup clutch solenoid (SL6)
(The manual feeder pickup roller moves down.) 13 side paper deck pickup solenoid
14 not used
COPIER > FUNCTION > CLEAR
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item Description Level
ERR Use it to reset an error code.
1
<Target Error Code>
E000, E001, E002, E003, E005, E013, E019, E020, E717, E719
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then on the main power.(Cleared after turning OFF/ON the main power.)
DC-CON Use it to initialize the RAM on the DC controller PCB.
1
<Procedure>
1) Print out the particulars of service mode by making the following selections: COPIER > FUNCTION > MISC-P > P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power.(Cleared after turning OFF/ON the main power.)
4) As necessary, enter the data printed out using P-PRINT.
R-CON Use it to initialize the RAM on the reader controller PCB.
1
<Procedure>
1) Print out the particulars of service mode by making the following selections: COPIER>FUNCTION>MISC-P>P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power. (Cleared after turning OFF/ON the main power.)
4) As necessary, enter the data printed using P-PRINT.
JAM-HIST Use it to reset the jam history.
1
<Procedure>
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
ERR-HIST Use it to reset the error code history.
1
<Procedure>
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
PWD-CLR Use it to reset the password for 'system administrator' set in user mode.
1
<Procedure>
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
ADRS-BK Use it to reset the address book data.
1
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power switch.(Cleared after turning OFF/ON the main power.)