Canon iR7086, Service Manual

Page: 349 / 735

Chapter 8
8-49
F-8-139
2) Disconnect the connector [3]; then, remove the screw [4], and detach the
postconfluence sensor [5].
F-8-140
8.11.22.13 Removing the Front Deck (lifter) Draw-Out
Sensor
0010-9376
iR7105 / iR7095 / iR7086
1) Disconnect the connector [1] from the bottom of the duplexing unit; then,
remove the screw [2], and detach the front deck (left) feed sensor [3].
F-8-141
8.11.22.14 Removing the Horizontal Registration Sensor
0010-9377
iR7105 / iR7095 / iR7086
1) Remove the duplexing unit from the main body.
2) Remove the front cover.
3) Disconnect the connector [1], and remove the three screws [2].
F-8-142
4) Remove the screw [3], and detach the duplexing unit right fixing assembly
[4]; then, remove the two screws [5] at the rear, and detach the right grip
plate [6].
F-8-143
When mounting the right grip plate, be sure that the boss on the grip plate is
in the hole of the side plate.
5) Remove the screw [7], and detach the horizontal registration sensor [8].
F-8-144
8.11.23 Separation Roller
8.11.23.1 Removing the Separation Roller
0010-9378
iR7105 / iR7095 / iR7086
1) Remove the two mounting screws [1], and remove the feeding guide plate
[2]; then, detach the open/close guide [3]. (Skip this step for the pickup
assembly of the front deck left.)
F-8-145
2) Remove the two mounting screws [4], and remove the separation roller as-
sembly [5] from the joint. (If for the pickup assembly of the front deck
left, remove one screw.)
[1]
[1]
[2]
[3]
[5]
[4]
[1]
[3]
[2]
[2]
[2] [1]
[6]
[4]
[3]
[5]
[8]
[7]
[1]
[1]
[2]
[3]