Canon iR7086, Service Manual

Page: 452 / 735

Chapter 11
11-32
1) Log on to SMS, and click 'Application List' tab.
2) Check 'Application List' page appears.
3) On the application list, select the radio button of the application you want to uninstall, and click 'Uninstall' button.
Memo:
Dimmed Uninstall button shows that the selected application cannot be removed.
F-11-51
4) Check the screen to make sure that what is shown is the application you want to uninstall; then, click OK button.
In response, the system runs an uninstall sessions.
Important:
- The status of the license must be 'Not Installed' or 'Unnecessary' for its application to be uninstalled. As necessary, go to License File Management page, and
disable the license file before starting to remove it.
- A license file may be invalidated only when its application is not active.
- If the application you are uninstalling is associated with another application, a message will appear to indicate that the package exported by the application will
no loner be available. Uninstalling such an application may also disable its associated applications.
11.1.23 Changing Login Services
0017-9709
iR7105 / iR7095 / iR7086 / iR7095P
Login Service Overview
The login service is used to authenticate users who logs in to a MEAP device. You can change login services or uninstall them using System Management site.
At time of shipment, the login service offers the following 3 modes of authentication:
- Default authentication
- SDL (Simple Device Login)
- SSO (Single Sign-On)
Important:
- To set SDL, the registered information in SDL and the registered user data (Department ID and Password) in Department ID Management of the machine have
to match.
- To set up SDL or SSO, Department ID Management must be set to Off in advance. To use SDL and Department ID Management simultaneously, set
Department ID Management to On after switching the login service to SDL.
- If SSO is set as the login service, NetSpot Accountant is necessary for using Department ID Management.
- If SSO is set, you cannot use an optional card reader.
- To set to SSO, first adjust the current time for the PC where Active Directory is running, the iR, and the PC where users log on. If there is more than a 30-
minute difference among them, an error occurs at logon.
- If SSO or SDL is set as login service, it takes time until the iR is ready to start up.
- When the SEND function is used in the environment of SDL and SSO, it is necessary to set each user's mail address to transmit E-mail. When the mail address
is not set, E-mail cannot be transmitted. However, when i-Fax is transmitted, the mail address set to the device is used.
Outline of Default Authentication