Canon iR7086, Service Manual

Page: 715 / 735

Chapter 18
18-24
An old model has to be upgraded to the V50.00 system or later for an upgraded device.
See the following procedure to upgrade.
1) Before upgrade, backup the data if needed.
2) Register the Boot V10.99 and each firmware for upgrade device in SST (Ver.3.34 or later) beforehand.
3) Start with pressing 2 + 8 and rewrite the Boot ROM with using SST. (For upgrade device Boot V10.99)
After rewriting, becomes V4.44.
4) After turning OFF the power, start with pressing 2 + 8.
At upgrade, HDD must be all formatted; thus, user data saved in HDD will be initialized.
The data in additional function cannot be imported with the upgraded device; thus, backup is not needed.
Main data items which cannot be taken over after upgrade Service action at upgrade
<Common Settings>Stack Bypass Standard Settings Ask user to reset
<Mail Box Settings>User Inboxes Settings Ask user to reset
<Mail Box Settings>Standard Scan Settings Ask user to reset
<Mail Box Settings>Confidential Fax Inboxes Settings Ask user to reset
<Copy Settings>Standard Settings Ask user to reset
<System Settings>Device Information Delivery Settings: Transmitting Settings Ask user to reset
<System Settings>Device Information Delivery Settings: Receive Restriction for Each Function Ask user to reset
<COPY>Mode memory Ask user to reset
<COPY>Recall Tell user that it will be deleted
<BOX>BOX Scan mode memory Ask user to reset
<BOX>BOX Print mode memory Ask user to reset
<SEND>Recall Tell user that it will be deleted
<SEND>Standard Send Settings Ask user to reset
<Log>Send/Receive log Tell user that it will be deleted
<Log>Copy log Tell user that it will be deleted
<Log>Printer log Tell user that it will be deleted
<Log>Network log Tell user that it will be deleted
<Log>Job No. Tell user that it will be deleted
<Device Information Delivery Settings>Destination registered at the destination settings Ask user to reset
<Device Information Delivery Settings>Receive Restriction for Each Function Ask user to reset
<Device Information Delivery Settings>Communication Log Tell user that it will be deleted
Document data items in the box Service action at upgrade
User Inbox Ask user to backup with BOX backup function. If an
environment privents users from backing up, ask them to output.
Conf.Fax Inbox, Memory Rx Inbox, Form for Form Compositon Before upgrade, it cannot be backed up and it will be deleted. So
ask users to output.
Address Book related data items Service action at upgrade
Favorites Button Import after export
Address Book (Including the one-touch button) Import after export
Fowarding Settings Import after export
MEAP related data items Service action at upgrade
If application supports J2ME1.1 Prepare the supporting .jar file
If the application which does not support J2ME1.1 is included. System cannot be upgraded
If the application uses the limited license Save the invalid license at uninstallation and reinstall by using it
If the application uses the unlimited license (reusable license). Can be reinstalled with the same license
Note that once Boot ROM is rewritten, it cannot be returned to the old model.
If it does not start, E0602-0002 error will occur.