Canon iR7086, Service Manual

Page: 659 / 735

Chapter 17
17-71
REBOOTSW enables/disables the rebooting mechanism in conjunction with E240
2
settings:
0: reboot (default); 1: do not reboot
Do not use for servicing.
UI-PRINT
*** Set whether or not to display the print job screen in the control panel.
2
This is a switch to set whether or not to display the print job screen in the control panel.
This is a specification for a user who does not desire to display the screen in the control panel.
Setting range
0: Do not display the print job screen.
1: Display the print job screen.
Standard value
1
WUEV-SW
*** Set whether or not to provide a notice of the sleep mode operation.
2
Set whether or not to provide a notice of the sleep mode operation to the DS application on network when the copier main unit entered
the sleep mode or recovered from the sleep mode.
Setting range
0: Provide a notice.
1: Do not provide a notice.
Standard value
0
WUEV-INT
*** Set the interval to provide a notice of the sleep mode operation.
2
Setting range
60 to 65535
Standard value
600
WUEV-POT
*** Set a port number for the destination to provide a notice of the sleep mode operation.
2
Setting range
1 to 65535
Standard value
11427
WUEV-RTR
*** Set a range to provide a notice of the sleep mode operation.
2
Set the number of routers that can be used for a notice of the sleep mode operation.
Setting range
0 to 254
Standard value
3
SJB-UNW
*** Switch the number of reserved jobs for secure print jobs.
2
Switch the number of reserved jobs for secure print jobs to 50 or 90.
Setting range
0: 50
1: 90
Standard value
0
UI-RSCAN
*** Set whether or not to display the remote scan screen in the control panel.
2
This mode is used to set whether or not to display the remote scan screen in the control panel.
This is a specification for a user who does not desire to display the screen in the control panel.
Setting range
0: Do not display the screen.
1: Display the screen.
Standard value
1
UI-EPRNT
*** Set whether or not to display the expansion printing screen in the control panel.
2
This mode is used to set whether or not to display the expansion printing screen (EFI print screen) in the control panel.
This is a specification for a user who does not desire to display the screen in the control panel.
Setting range
0: Do not display the screen.
1: Display the screen.
Standard value
1
COPIER > OPTION > BODY
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
***: up graded version
Sub item Description Level