Canon iR7086, Service Manual

Page: 340 / 735

Chapter 8
8-40
F-8-79
- The rear pickup roller is identified by its gold collar.
When mounting the pickup roller [3] to the pickup assembly, be sure that
the round marking [4] on the side of the roller and the round marking [5]
on its collar (gold) are toward the machine's rear.
F-8-80
8.11.10 Manual Feed Roller
8.11.10.1 Removing the Feeding Roller
0010-8994
iR7105 / iR7095 / iR7086
1) Remove the pickup roller, and remove the stop ring.
2) Remove the two screws [1], and detach the manual feed tray guide [2].
F-8-81
3) Remove the stop ring [3] from the front of the feeding roller assembly, and
move the feeding roller assembly [5] together with the timing belt [4] to
detach.
F-8-82
8.11.10.2 Orientation of the Feeding Roller
0010-8998
iR7105 / iR7095 / iR7086
When mounting the feeding roller [6] to the manual feed tray pickup assem-
bly, be sure that the belt pulley [7] and the round marking [8] are toward the
machine's front.
F-8-83
8.11.10.3 Removing the multiple curling prevention roller
0010-8999
iR7105 / iR7095 / iR7086
1) Open the manual feeder tray cover and the upper right cover.
2) Remove the manual feeder tray unit.
3) Remove the manual feeder pull-off roller unit.
4) Remove the rear upper right cover.
5) Remove the hopper upper cover.
6) Remove the hopper right cover.
7) Remove the right inside front cover [1].
- 2 screws [2]
F-8-84
8) Remove the rail base (front) [1].
- 2 screws [2]
F-8-85
9) Remove the screw [2], and detach the rear fixing plate [1]; then, detach the
rear fixing plate [3].
F-8-86
10) Remove the following at the front and the rear: E-ring [1], space [2],
bearing [3]. Then, detach the multifeeder curl-removing roller [4].
[1]
[2]
Direction of
rotation
Collar (silver)
front of
the machine
Direction of
rotation
Collar (gold)
[3]
[4]
[5]
rear of
the machine
[1] [2] [1]
[5]
[4]
[3]
5
5
front of the
machine
[8]
[6]
[7]
[1]
[2]
[1]
[2]
[1] [2]
[3]