Canon imageRunner 2022 Service Manual Download Page 84

Page: 84 / 418

Chapter 2

2-12

4) Using

, select the country/region type that conforms to the com-

munication standard used in the country/region where the machine is
used.

5) Press the OK. When "Please Wait" disappears, the selected country/region

type takes effect.

2.2.11 Setting the Date and Time

0017-5534

iR2018 / iR2022

1) Press the additional functions keys to display the user mode screen.
2) Select "4. TIMER SETTINGS" using the + or - key, and then press the OK

key.

3) Select "1. DATE&TIME SETTING" using the + or - key, and then press

the OK key. The set date and time appears.

4) Enter the current date and time by moving the cursor to the characters you

want to enter with the + and - keys.

5) Press the OK key to allow the entered date and time to take effect.

Summary of Contents for imageRunner 2022



































































































































































































































































































































































































































Search results

Summary of Contents for imageRunner 2022

Reviews:

Brands by name

Popular brands

Canon imageRunner 2022, Service Manual

Search results

Summary of Contents for imageRunner 2022

Reviews:

Brands by name

Popular brands