Canon imageRunner 2022, Service Manual

Page: 261 / 418

Chapter 10
10-3
- The timing of transmission to UGW varies according to the device.
- The timing of transmission to UGW cannot be set on the side of the device.
10.1.8 Retransmission at the time of SOAP Transmission Error
0017-6741
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
In case the SOAP transmission error occurs due to the fault at UGW side at the time of the alert code transmission, store the last 3 data failed to transmit in the
RAMDISK, and retransmit it with the predefined intervals.
In addition, in case the SOAP transmission error occurs at the time of the jam log or service call log transmission, retransmit the data failed to transmit with the
predefined intervals. (When transmitting these 2 types of data, RAMDISK is not used, and the number of retransmission is not restricted.)
10.1.9 e-RDS Setting Screen
0017-6742
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
(1). Setting Items
The forms and default values of the setting items related to the e-RDS in the service mode are as follow:
T-10-2
(2). Screen Menu
Operation list check
getOperationList Once every 16 hours.
Upon a request from UGW
Schedule information update
getConfiguration At the time of communication test
Environment log (Device condition log) transmission
postEnvironmentLog Once every 12 hours. The environment information inside the
device such as temperature and humidity.
Alert filtering
getAlertCodeNotificationList Upon a request from UGW When requested from UGW with
'getOperationList'
Service Mode
Setting Items (Meaning)
Description
E-RDS SWITCH e-RDS OFF/ON 0: OFF/1: ON
When the setting is ON, transmit the counter information and error information to UGW.
Default value: 0 (OFF)
RGW-ADDRESS
(RDS-Gateway ADDRESS) URL of UGW
Default value: the actual URL of UGW
Number of characters: 129 bytes (Including NULL. 1-byte code only)
RGW-PORT
(RDS-Gateway PORT) Port number of UGW
Default value: 443
Setting range: 1 to 65535
COM-TEST
(Communication Test) Execution of communication test
Judge whether the connection with UGW is established, and display the result with either 'COM-TEST OK' or
'COM-TEST NG'.
COM-LOG
(Communication Log) Detail of the communication test result
Display the error log for the communication with UGW.
As the error information, occurred time, error code, and error detail information are displayed.
Max. number of log: 5
Error information: max. 128 characters (Excluding NULL)
Transmission Detail / Process Detail Transmission Timing Remarks