Canon imageRunner 2022, Service Manual

Page: 251 / 418

Chapter 9
9-13
1) Open the left door until it stops.
2) Remove the transfer/registration unit [1].
- Screw [2], 4 pcs.
F-9-46
3) Disconnect the connector [1], and then release the harness from the wire
saddle [2].
F-9-47
4) Remove the duct [1].
- Screw [2], 2 pcs.
F-9-48
5) Remove the fan filter [1] from the duct.
F-9-49
9.4.10.2 Removing the Fan Filter (With Duplex Unit Type)
0017-8832
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
1) Draw out the drum unit.
2) Detach the rear cover.
3) Detach the left cover (rear).
4) Disconnect the relay harness [2] from the connector [1].
5) Disconnect the ground cable [3].
- Screw [4], 1 pc.
6) Remove the reusable band [5] from the duplex unit harness at the rear-left
of the main body, and then return the duplex unit harness [6] to the left
door side.
F-9-50
7) Rremove the transfer/registration unit [1].
- Screw [2], 4 pcs.
F-9-51
[2] [2]
[1]
[2]
[1]
[1]
[2]
MEMO:
When a duplex unit is used, first remove the duplex unit and next remove
the fan filter from it.
[1]
[3] [4]
[6]
[1]
[2]
[5]
[2] [2]
[1]