Canon imageRunner 2022, Service Manual

Page: 348 / 418

Chapter 15
15-26
15.6.9 <041: Vertical scan start position adjustment (when scanning on a document fed from ADF)>
0017-6124
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Adjust the position at which vertical scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the left-side margin of the
image becomes.
15.6.10 <042: Horizontal scan start position adjustment (when scanning on a document fed from ADF)>
0017-6125
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Adjust the position at which horizontal scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the top margin of the image
becomes.
15.6.11 <043: Horizontal scan end position correction ((copy:scanning on ADF)>
0017-6126
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Adjust the position at which horizontal scanning of a document being copied ends (when scanning on a document fed from ADF). The larger the adjustment value,
the narrower the bottom margin of the image becomes.
15.6.12 <044: Horizontal scan end position correction (superfine:scanning on ADF)>
0017-6127
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Adjust the position at which horizontal scanning of a FAX document scanned in superfine mode ends. The larger the adjustment value, the narrower the bottom
margin of the image becomes.
15.6.13 <045: Horizontal scan end position correction (fine:scanning on ADF)>
0017-6128
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Adjust the position at which horizontal scanning of a FAX document scanned in fine mode ends. The larger the adjustment value, the narrower the bottom margin
of the image becomes.
15.6.14 <046: Horizontal scan end position correction (standard:scanning on ADF)>
0017-6129
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Adjust the position at which horizontal scanning of a FAX document set to the standard scan resolution ends. The larger the adjustment value, the narrower the
bottom margin of the image becomes.
15.6.15 <047: Vertical scan magnification correction (when scanning on a document fed from ADF)>
0017-6130
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Correct the magnification of vertical scanning of a document fed from the ADF. The larger the adjustment value, the more the image stretches in the vertical scan-
ning direction.
15.6.16 <048: Horizontal scan magnification correction (when scanning on a document fed from ADF)>
0017-6131
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Correct the magnification of horizontal scanning of a document fed from the ADF. The smaller the adjustment value, the more the image stretches in the horizontal
scanning direction.
This menu is used to adjust the ADF feed motor speed. If you changed the adjustment value in this mode, the adjustment value selected for SCAN NUMERIC>54
must also be incremented/decremented by the same amount.
Do not change the adjustment value extremely.
15.6.17 <193: ADF special standard-sized paper: LGL misidentification-ready>
0017-6132
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because it is misidentified as "LEGAL").
0: LEGAL
1: FOOLSCAP
2: M_OFFICIO
3: A_FOOLSCAP
4: FOLIO
5: G_LEGAL
6: A_OFFICIO
7: B_OFFICIO
15.6.18 <194: ADF special standard-sized paper: LTR misidentification-ready>
0017-6133
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because it is misidentified as "LTR").
0: LTR
1: G_LTR
2: A_LTR
15.6.19 <195: ADF special standard-sized paper: LTR_R misidentification-ready>
0017-6134
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Set to use special standard-sized paper that is not otherwise identifiable to the ADF (because it is misidentified as "LTRR").
0: LTR_R
1: FOOLSCAP
2: OFFICIO
3: E_OFFICIO
4: G_LTR_R