Cadillac Escalade EXT Owner'S Manual Download Page 73

Page: 73 / 402

73 . . .

–

Section

•

CALIBRATING: DRIVE IN
CIRCLES

(calibrating: drive in

circles)

Note: This message may not be
available on all vehicles.

Appears when the compass is
being calibrated.

See "Compass Calibration" ear-
lier in this section for more
information.

•

CALIBRATION COMPLETE

(calibration complete)

Note: This message may not be
available on all vehicles.

Appears when the compass has
been calibrated successfully.

See "Compass Calibration" ear-
lier in this section for more
information.

•

CHANGE ENGINE OIL SOON

(change engine oil soon)

Appears when the life of the
engine oil has expired and the
oil should be replaced.

See "Engine Oil" in Section 4
for more information.

Also see the Maintenance
Schedule booklet for more
information.

After you change the oil, you
need to reset the system.

See the following for more
information:

- Vehicle Information Menu

OIL LIFE REMAINING

(oil life

remaining)

•

DRIVER DOOR OPEN

(driver

door open)

Appears with a chime when the
driver's door is open or ajar and
the vehicle is shifted out of

(Park).

Make sure that there are no
obstructions in the way of the
door and close the door.

$10araEscaladeEXT Page 73 Wednesday, October 14, 2009 9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Search results

Summary of Contents for Escalade EXT

Reviews:

Related manuals for Escalade EXT

Brands by name

Popular brands

Cadillac Escalade EXT, Owner'S Manual

Search results

Summary of Contents for Escalade EXT

Reviews:

Related manuals for Escalade EXT

Brands by name

Popular brands