manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

109 . . .

–

Section 

1

This mode divides airflow 
between the windshield 
defroster vents, the floor 
outlets and the side 
window defroster vents.

Use this mode to remove 
fog from the windshield or 
side windows while also 
heating the vehicle.

The A/C compressor 
will automatically 
operate in this mode if 
the temperature is above 
4°C.

The recirculation function 
cannot be activated in this 
mode.

Do not drive the vehicle 
unless all windows are 
clear of fog, snow, ice 
or anything else that may 
obstruct your vision.

Defrosting

Press 

 to get fog or ice off the 

windshield and side windows.

This mode divides airflow between 
the windshield defroster vents, the 
floor outlets and the side window 
defroster vents.

The A/C compressor will automat-
ically operate in this mode if the 
temperature is above 4°C.

The recirculation function cannot 
be activated in this mode.

Do not drive the vehicle unless all 
windows are clear of fog, snow, ice 
or anything else that may obstruct 
your vision.

When defrost mode is selected, 
the passenger’s temperature 
setting cannot be changed.

If you press the passenger’s 
temperature knob when the 
defrost mode is active, the passen-
ger temperature display will flash 
three times to let you know that 
the function will not operate.

If the passenger’s temperature 
setting is adjusted while defrost 
mode is active, the driver’s 
temperature display will change. 
The passenger’s temperature will 
not be displayed.

If another air delivery mode is 
selected, the previous temperature 
settings will be displayed for the 
driver and passenger.

$10araEscaladeEXT  Page 109  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

JETBAG 320 Fitting Instructions Manual preview
320
Brand: JETBAG Pages: 44
Jeep Wrangler 2011 Owner'S Manual preview
Wrangler 2011
Brand: Jeep Pages: 603
Jeep Patriot 2011 User Manual preview
Patriot 2011
Brand: Jeep Pages: 80
Vauxhall 2009 Tigra Quick Reference Manual preview
2009 Tigra
Brand: Vauxhall Pages: 2
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
Metra Electronics 95-6556 Installation Instructions preview
95-6556
Brand: Metra Electronics Pages: 4
Rostra REARSIGHT OnStar 250-8822 Installation Instructions preview
REARSIGHT OnStar 250-8822
Brand: Rostra Pages: 2
Subaru 2005 Baja Owner'S Manual preview
2005 Baja
Brand: Subaru Pages: 34
EUFAB 12015 Manual preview
12015
Brand: EUFAB Pages: 12
Dometic Heki 2 Installation And Operating Manual preview
Heki 2
Brand: Dometic Pages: 158
Chevrolet LUMINA 1997 Owner'S Manual preview
LUMINA 1997
Brand: Chevrolet Pages: 376
Mazda 2008 CX-9 Brochure & Specs preview
2008 CX-9
Brand: Mazda Pages: 15
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
Cadillac 54-6219 1954 Shop Manual preview
54-6219 1954
Brand: Cadillac Pages: 409
Fortin THAR-AUD1 Manual preview
THAR-AUD1
Brand: Fortin Pages: 9

Brands by name

Popular brands

Load more brands