manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Instrumentation and Controls

. . . 62

Press the 

 button to enter the 

submenu.

While in this submenu, press 
the   button repeatedly to 
scroll through the following 
options:

-

NORMAL

 (normal)

-

LOUD

 (loud)

-

NO CHANGE

 (no change)

Once the desired setting is 
displayed, press the 

 button 

to select it.

You may now either exit pro-
gramming mode or program 
the next available feature.

To exit programming mode, 
see "Exiting Programming 
Mode" later in this section.

•

PARK TILT MIRRORS

 (park tilt 

mirrors)

With this feature turned on, 
the passenger's and/or driver's 
mirror will tilt down to a 
pre-programmed position, 
whenever the vehicle is shifted 
into 

R

 (Reverse) to allow you to 

view the curb while you parallel 
park.

Press the 

 button to enter the 

submenu.

While in this submenu, press 
the   button repeatedly to 
scroll through the following 
options:

-

OFF

 (off)

The outside mirrors do not tilt 
down when the vehicle is 
shifted into 

R

 (Reverse).

This is the default setting.

-

DRIVER MIRROR

 (driver 

mirror)

The outside mirror on the 
driver's side of the vehicle 
will tilt down to a curb-view 
position when the vehicle is 
shifted into 

R

 (Reverse).

-

PASSENGER MIRROR

 (pas-

senger mirror)

The outside mirror on the 
passenger's side of the vehicle 
will tilt down to a curb-view 
position when the vehicle is 
shifted into 

R

 (Reverse).

-

BOTH MIRRORS

 (both mir-

rors)

Both outside mirrors will tilt 
down to a curb-view position 
when the vehicle is shifted 
into 

R

 (Reverse).

-

NO CHANGE

 (no change)

$10araEscaladeEXT  Page 62  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

Camcar 40052 Mounting Instructions preview
40052
Brand: Camcar Pages: 6
Dakota Digital VHX-37F Installation preview
VHX-37F
Brand: Dakota Digital Pages: 2
Dakota Digital BIM-01-2 Manual preview
BIM-01-2
Brand: Dakota Digital Pages: 7
Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
Mitsubishi 1998 FTO Technical Information Manual preview
1998 FTO
Brand: Mitsubishi Pages: 160
Cadillac 2004 CTS Owner'S Manual preview
2004 CTS
Brand: Cadillac Pages: 442
HUSKY LINERS X-ACT CONTOUR 53491 Care And Use Instructions preview
X-ACT CONTOUR 53491
Brand: HUSKY LINERS Pages: 2
Volvo 30728293 Installation Instructions Manual preview
30728293
Brand: Volvo Pages: 19
Chevrolet Avalanche 2005 Owner'S Manual preview
Avalanche 2005
Brand: Chevrolet Pages: 494
GMC SIERRA 2002 Manual preview
SIERRA 2002
Brand: GMC Pages: 499
Kia Amanti Owner'S Manual preview
Amanti
Brand: Kia Pages: 290
Pontiac 2004 Vibe Navigation System Owner'S Manual preview
2004 Vibe Navigation System
Brand: Pontiac Pages: 44
UAZ 2001 ???-3741 Instruction Manual preview
2001 ???-3741
Brand: UAZ Pages: 112
Kia Bluetooth Phone System 2010 Reference Manual preview
Bluetooth Phone System 2010
Brand: Kia Pages: 16
Paccar PACCHARGE AC20 Installation Manual preview
PACCHARGE AC20
Brand: Paccar Pages: 63
iDataLink ADS-TBSL-GM Install Manual preview
ADS-TBSL-GM
Brand: iDataLink Pages: 6
Xingyun XY40EV Service Manual preview
XY40EV
Brand: Xingyun Pages: 74
Whelen Engineering Company LED Dominator TAM83S2 Installation Manual preview
LED Dominator TAM83S2
Brand: Whelen Engineering Company Pages: 2

Brands by name

Popular brands

Load more brands