Starting and Operating Instructions
. . . 234
3. Turn off the ignition and
remove the key.
4. Within five seconds of turning
off the ignition, insert the key
that you are programming
and turn it to
ON
.
Once the key is programmed,
the Security System Light will
turn off.
The key may be programmed
so quickly that you may not
even realize that the Security
System Light had turned on.
5. If additional keys are to be
programmed, repeat the
previous steps.
If all of your ignition keys are lost
or damaged, see your dealer or
a locksmith who can service
Pass-Key
®
III Plus systems to make
and program a new key.
■
THEFT DETERRENT
SYSTEM
Your vehicle is equipped with a
Theft Deterrent System.
To arm the system:
1. Open the door.
2. Lock the vehicle with the
remote keyless entry system or
the power door lock switch.
The security system light will
begin flashing to indicate that
the theft deterrent system is
arming.
3. Close all doors.
The Security System Light
will turn off after about
30 seconds.
When the light turns off, the
system is armed.
The system will not arm if you lock
the doors with a key or the manual
lock lever.
Note:
The theft deterrent system
does not have sensors for the
midgate and tailgate. If the
midgate and/or tailgate is open
or ajar when the system is
armed, vehicle contents may
not be protected by the system.
To disarm the system, you must
unlock the vehicle using the
keyless entry transmitter. If the
driver’s door is opened any other
way, the pre-alarm will activate.
The pre-alarm will sound for
10 seconds. The horn will chirp
and the lights will flash. Then the
full alarm will activate.
$10araEscaladeEXT Page 234 Wednesday, October 14, 2009 9:54 AM
