manualshive.com logo in svg

Cadillac Escalade EXT, Owner'S Manual

The Cadillac Escalade EXT Owner's Manual is an essential guide for all Escalade EXT owners, providing detailed instructions and insights into operating and maintaining this luxurious vehicle. Download this comprehensive manual for free from manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

Instrumentation and Controls

. . . 92

To return the system to its normal 
operating mode, press the button 
again.

When Stabilitrak is turned off, only 
the brake-traction control portion 
of traction control will work.

Engine speed management will be 
disabled.

Brake-traction control may 
activate more frequently.

NOTICE

Do not allow the wheel(s) of 
one axle to spin excessively 
when the Stabilitrak, antilock 
brake and brake system 
warning lights are on and a 
Stabilitrak/Traction Control 
message is displayed.

Otherwise, the transfer case 
could be damaged.

This could lead to costly repairs 
not covered by your warranty.

Immediately reduce engine 
power until the lights and 
messages are no longer 
displayed.

The traction control system may 
activate on rough roads, during 
heavy acceleration while turning, 
or when the transmission abruptly 
upshifts or downshifts.

When this happens, vehicle accel-
eration may be reduced.

You may feel or hear the system 
working, but this is normal.

If your vehicle is in cruise control 
when the Stabilitrak system 
begins to limit wheel spin, the 
cruise control will automatically 
disengage.

$10araEscaladeEXT  Page 92  Wednesday, October 14, 2009  9:54 AM

Summary of Contents for Escalade EXT



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade EXT

Camcar 40052 Mounting Instructions preview
40052
Brand: Camcar Pages: 6
Jacob Jensen Electronic Parking Disc II User Manual preview
Electronic Parking Disc II
Brand: Jacob Jensen Pages: 28
Wallbox Commander 2 Installation And User Manual preview
Commander 2
Brand: Wallbox Pages: 7
CITROEN PICASSO XSARA DESIRE 1.6 - MESUREMENT Manual preview
PICASSO XSARA DESIRE 1.6 - MESUREMENT
Brand: CITROEN Pages: 2
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
Dakota Digital MCL-7000 Series Quick Start Manual preview
MCL-7000 Series
Brand: Dakota Digital Pages: 2
Volvo 2010 C30 Owner'S Manual preview
2010 C30
Brand: Volvo Pages: 284
Waeco 8885100124 Operating Manual preview
8885100124
Brand: Waeco Pages: 172
VBG 56-201901 Mounting Instructions preview
56-201901
Brand: VBG Pages: 16
r.LiNK RL2-NBT Manual preview
RL2-NBT
Brand: r.LiNK Pages: 20
Curt Group Aries AL235045 Installation Manual preview
Aries AL235045
Brand: Curt Group Pages: 2
Nav TV NTV-KIT956 Manual preview
NTV-KIT956
Brand: Nav TV Pages: 8
BMW 84 64 0 025 810 Installation Instructions Manual preview
84 64 0 025 810
Brand: BMW Pages: 25
Toyota YARIS SEDAN 2019 Quick Reference Manual preview
YARIS SEDAN 2019
Brand: Toyota Pages: 17
GMC ACADIA 2017 Getting To Know Your preview
ACADIA 2017
Brand: GMC Pages: 20
DV8 LBBR-01 Installation Manual preview
LBBR-01
Brand: DV8 Pages: 5
Honeywell Thor VM1A Quick Start Manual preview
Thor VM1A
Brand: Honeywell Pages: 16
Honeywell Thor VM2C02 User Manual preview
Thor VM2C02
Brand: Honeywell Pages: 70

Brands by name

Popular brands

Load more brands